Cms Command Formats - IBM System/370 Operator's Reference Manual

CMS Command Formats
Source:
GC20-1806-1
hwoking the
Blrtch
Facility
CMS
The Batch Facility virtual machine is invoked by the batch operator when he issues the CP
IPL command followed by the CMSBATCH command. This sequence takes the form:
iplcms
CMS mm/dd/yy WED 17.58.48
cmsbatch
Y/S (19E)
RIO.
THE FOLLOWING NAMES ARE UNDEFINED:
BATEXIT1 BATEXIT2
R; T;O. 14/0.39 08:47:40
WAITING FOR THE READER
The operator may now disconnect the batch machine tenninal. if he wishes, using the
CP DISCONN command. The
Batc~
Facility will IPL itself after each job is executed.
COPYFILE
CMS
Copies files according to operand specifications.
I
COPYfile
fileid1 [fileid2 . . . ]
I
[ (options)]
options:
[
Type l[OLDDateJ [RECfm F] [NOpromPt] [TRAns]
~
NEWDate RECfm V PRompt
[
UPcase
1
[From recno ] [FOR recno ]
LOWcaseJ FRLabel xxxxxxxx TOLabel xxxxxxxx
[
REPlace
1
[Fill c
J
r
TRUnc
] [PAck ] [EBcdic]
OVlv Fill hh NOTRunc UNPack
APpend
J
Fill 40
~---
NEWFile - - [LRecl nn] [SPecs ]
NOSPecs
DDR
CMS
INVOKING DDR UNDER CMS
DDR
[filename [filetype
[til~ode]
INVOKING DDR AS A STANDALONE PROGRAM
To use DDR as a standalone program, the operator should IPL it from a real or virtual IPL
device as he would any other standalone program. Then indicate where the DDR program is
to obtain its control statements by responding to prompting messages at the console.
DIRECT
CMS
To build a user directory on a system-owned volume using preallocated cylinders.
[filename [filetype [filemOde] ] ] (EDIT)
If running under VM/370, a nonnal completion results in the newly created directory
being dynamically swapped, and placed in use by VM/370 (providing the users class is A,
B or C and the directory volume is present in the system owned LIST). I n either case the
directory is updated on the directory volume.
Page 4-64