Table of Contents
Advertisement
DOSIVS IPL Commands
Operation
Operand
Remarks
ADD
The
X'55'
parameter specifies whether
(Cont'd)
or not the error correction feature is
present on an IBM 1018 Paper Tape
Punch with 2826 Control Unit. These
specifications are:
X'OO' -No error correction feature
X'OI' Error correct ion feature
For the ICA of theM 115/125,
X'55'
X'ssss' or X'ssssss' is used to specify
the line mode setting for a Start/Stop
line or a BSC line. This is not accept-
ed on the ASSGN statement.
If a one or two byte value is specified
the specified value is right-justified
and the rest of the three bytes is fi lied
with zeros.
Note: 'Optional statement; if required
it must be entered before SET command
CAT
UNIT= X'cuu'
Assigns the system logical unit SYSCA
X'cuu':
Indicates the hexadecimal
channel (c) and unit (uu)
number of the device that is
I
to contain the
VSAM
cata-
log. SYSCAT may only be
I
assigned to the following
DASD types: 2314/2319 and
3330/3333.
Note: Optional statement; if required
the CAT command must follow the
SET
command and precede the DPD com'd.
DEL
X'cuu'
Delete a device from the PIJI table.
X'cuu':
Channel and unit number.
Nate: Optional statement;
i~
required
it must be entered before SET command
DPD
[TYPE={~}][,UNIT=
X'cuu',
Defines the page data set.
TYPE=N:
Indicates that the page
CYL= xxxll, VOLID=
xxxxxx]
data set need not be for-
matted and the extent
limits have nat been
changed.
If TYPE= N is specified but the page
I
I
dala set does not exist or the extent
I
limits have been changed, TYPE= N
is ignored and the page data set is
formatted during
!Plo In
!hi!
C!IP.'.
!he
I
UNIT and CYL operands must either
have been supplied during
system
ge-
neration, or they must be specified in
the DPD command.
Page 4-2
Hide quick links:
Advertisement
Table of Contents
