Certifications; Ul Certification; Ul Haz. Loc. Certifications; Gost-R - B&R Industries MAPPC900-ENG User Manual

Standards and certifications • Certifications

2 Certifications

Danger!
A complete system can only receive certification if ALL of the individual components it includes have
the applicable certifications. If an individual component is being used that DOES NOT have an applic-
able certification, then the complete system will NOT RECEIVE certification.
B&R products and services comply with applicable standards. This includes international standards from organi-
zations such as ISO, IEC and CENELEC, as well as national standards from organizations such as UL, CSA, FCC,
VDE, ÖVE, etc. We are committed to ensuring the reliability of our products in an industrial environment.
Unless otherwise specified, the following certifications apply:

2.1 UL certification

2.2 UL Haz. Loc. Certifications

Ind. Cont. Eq.
for Haz.Locs.
Cl. I, Div. 2,
Groups ABCD
2P61 (T3C)

2.3 GOST-R

252
Products with this label have been certified by Underwriters Laboratories and are
listed as "Industrial Control Equipment". This mark is valid for the USA and Canada
and simplifies the certification of your machines and systems in these areas.
Underwriters Laboratories (UL) in accordance with the UL508 standard - 17th Edition
Canadian (CSA) standard in accordance with C22.2 No. 142-M1987
Products with this label have been certified by Underwriters Laboratories and are
listed as "Industrial Control Equipment for Use in Hazardous Locations". This mark
is valid for the USA and Canada and simplifies the certification of your machines and
systems in these areas.
Underwriters Laboratories (UL) in accordance with standard ANSI/ISA 12.12.01:2013
Canadian (CSA) standard in accordance with C22.2 No. 213-M1987
Products with this mark have been certified by an accredited certification body and
have been approved for import to the Russian Federation.
Panel PC 900 User's Manual V1.05