Oem Features - B&R Industries MAPPC900-ENG User Manual

1.4.2 OEM features

BIOS setting Function
Main BIOS version Displays the installed B&R BIOS version
OEM BIOS version
MTCX Displays the installed MTCX version
ETH1 MAC address Displays the assigned MAC address for the
ETH1 interface
ETH2 MAC address Displays the assigned MAC address for the
ETH2 interface
Real-time environment Configures settings for real-time operating sys-
tems such as ARwin
TI XIO2001 PCI bridge Option for setting DMA access
1)
Super I/O configuration Configures special interface settings
CPU board features Displays device-specific information for the CPU
board
System board features Displays device-specific information for the sys-
tem unit
Memory module features Displays device-specific information for the main
memory
Display board features Displays device-specific information about the
Panel PC display.
Bus unit features Displays device-specific information for the bus
unit
I/O board 1 features Displays device-specific information for interface
2)
option 1
I/O board 2 features Displays device-specific information for interface
2)
option 2
Fan unit features Displays device-specific information for the fan
3)
kit
Panel PC 900 User's Manual V1.05
Figure 109: Advanced - OEM features
Configuration options
Table 142: Advanced - OEM features screen
Software • BIOS options
Effect
None -
None -
None -
None -
None -
Disabled Disables this function
Enabled Disables hyper-threading, turbo mode and
EIST. Also disables ASPM and the IRQ of root
ports 2 and 3.
Enabled Optimizes DMA access
Disabled Disables this function
Enter Opens the submenu
See "Super I/O configuration" on page 176
Enter Opens the submenu
See "CPU board features" on page 177
Enter Opens the submenu
See "System board features" on page 178
Enter Opens the submenu
See "Memory module features" on page 181
Enter Opens the submenu
See "Display board features" on page 182
Enter Opens the submenu
See "Bus unit features" on page 185
Enter Opens the submenu
See "I/O board 1 features" on page 186
Enter Opens the submenu
See "I/O board 2 features" on page 188
Enter Opens the submenu
See "Fan unit features" on page 189
175