Table of Contents
Advertisement
2.1.2 Procedure with MS-DOS
1. Download the .zip file from the B&R website (www.br-automation.com).
2. Create bootable media.
Information:
In MS-DOS, Win95 and Win98, a blank HD disk can be made bootable by typing "sys a:" or "format a: /
s" on the command line.
Information about creating a bootable diskette in Windows XP can be found on page 237.
Information on creating a USB flash drive for a B&R upgrade can be found on page 239.
Information on creating a storage device for a B&R upgrade can be found on page 240.
3. Copy the contents of the .zip file to the bootable media. If the B&R upgrade was already added when creating
the bootable media with the B&R Embedded OS Installer, then this step is not necessary.
4. Connect the bootable media to the B&R device and reboot.
5. The following boot menu will be shown after startup:
1 . U p g r a d e A M I B I O S f o r A P C 9 1 0 / P P C 9 0 0 ( Q M 7 7 o r H M 7 6 )
2 . E x i t
Item 1:
BIOS is automatically upgraded (default after 5 seconds).
Item 2:
Returns to the shell (MS-DOS)
Information:
If a button is not pressed within 5 seconds, then item 1 is automatically carried out to update the
industrial PC.
6. The system must be rebooted after a successful upgrade.
7. Reboot and press <Del> to enter BIOS Setup and load the setup defaults, then select "Save changes and
exit".
Panel PC 900 User's Manual V1.05
Software • Upgrade information
235
Advertisement
Table of Contents
