Boot Configuration - B&R Industries MAPPC900-ENG User Manual

BIOS setting Function
Boot priority selection Option for determining the method for how dri-
ves should be booted
1st boot device Option for selecting drives to be used for boot-
ing
2nd boot device
3rd boot device
4th boot device
5th boot device
6th boot device
7th boot device
8th boot device

1.5.2 Boot configuration

BIOS setting Function
PXE Option ROM launch Option for booting from PXE Option ROM
policy
Storage Option ROM Option for booting from Storage Option ROM
launch policy
Video Option ROM launch Option for booting from Video Option ROM
policy
Panel PC 900 User's Manual V1.05
Table 191: Boot - Boot device priority - Configuration options
Figure 159: Boot - Boot configuration
Table 192: Boot - Boot configuration - Configuration options
Configuration options Effect
Device based Only lists devices that are recognized by the
system. The order of devices in this list can be
changed.
Type based The boot sequence of a device type list can be
changed. It is also possible to add device types
that are not connected to this list.
Disabled, SATA 0 drive, Specifies the desired boot sequence
SATA 1 drive, SATA 2 dri-
ve, SATA 3 drive, USB flop-
py, USB hard disk, USB
CDROM, Onboard LAN, Exter-
nal LAN, Other BEV device
Configuration options Effect
Do not launch Does not boot from PXE Option ROM
UEFI ROM only Boots from UEFI ROM
Legacy ROM only Boots from legacy ROM
Do not launch Does not boot from Storage Option ROM
UEFI ROM only Boots from UEFI ROM
Legacy ROM only Boots from legacy ROM
Do not launch Does not boot from Video Option ROM
UEFI ROM only Boots from UEFI ROM
Legacy ROM only Boots from legacy ROM
Software • BIOS options
Information:
It is only possible to use either "Device
based" or "Type based". Using both to-
gether is not permitted.
Information:
It is only possible to use either "Device
based" or "Type based". Using both to-
gether is not permitted.
221