Table of Contents
Advertisement
Installation • Configuring a SATA RAID set using the internal RAID controller
The following keys can be used once inside BIOS Setup:
Key
Cursor ↑
Cursor ↓
Enter
ESC
Ctrl+E
7.1 Create RAID volume
Parameter
Function
Name
Option for entering the RAID name
RAID level
Option for setting the RAID level
Disks
Specifies the installed hard disks as either Mas-
1)
ter or Recovery
Strip size
Option for configuring the size of data blocks
2)
Capacity
Option for configuring the RAID capacity
Sync
Option for configuring RAID synchronization
3)
Create volume
Creates the RAID volume
1)
This setting is only possible if RAID level is set to Recovery.
2)
This setting is only possible if RAID level is set to RAID0(Stripe).
3)
This setting is only possible if RAID level is set to Recovery.
164
Function
Moves to the previous item
Moves to the next item
Selects an item or opens a submenu
Returns to the previous menu
Saves any changed settings and exits setup
Table 134: BIOS-relevant keys in the RAID Configuration Utility
Figure 100: Configuration Utility - Create RAID volume
Table 135: Configuration Utility - Create RAID volume
Configuration options
Effect
Name with up to 16 characters Assigns a name to the RAID volume
RAID0 (Stripes)
Creates RAID0
RAID1 (Mirror)
Creates RAID1
Recovery
Creates recovery RAID
Master, Recovery
Defines the hard disks as Master or Recovery
4 KB, 8 KB, 16 KB, 32
Configures the size of the data block
KB, 64 KB, 128 KB
Configures the memory size of the RAID
N/A
-
Continuous
Automatically synchronizes the RAID
On request
Manually synchronizes the RAID
-
Creates the RAID volume
Panel PC 900 User's Manual V1.05
Advertisement
Table of Contents
