Logo Descriptor Programming - Sam4s ER-380 Operator's Manual

Logo Descriptor Programming

Programming the Receipt
A preamble message of up to six lines can be printed at the top of each receipt; a postamble message
of up to six lines can be printed at the bottom of each receipt, a separate message can be printed on the
DataTran Credit/Debit draft receipt and an endorsement message of up to ten lines can be printed
when a check is endorsed on an optional slip printer. Each line can consist of up to 32 characters.
ER 380/380M Electronic Cash Register v2.9
1. Turn the control lock to the P position.
2. To begin the program, enter 7 0 0, press the SBTL key.
7 0 0
3. Refer to the chart below and enter the number that represents the line you wish to
program; press the X/TIME key.
X X/TIME
X
X Message Line
st
1 1 line of Preamble
nd
2 2 line of Preamble
rd
3 3 line of Preamble
th
4 4 line of Preamble
th
5 5 line of Preamble
th
6 6 line of Preamble
st
7 1 line of Postamble
nd
8 2 line of Postamble
rd
9
3 line of Postamble
th
10 4 line of Postamble
th
11 5 line of Postamble
th
12 6 line of Postamble
st
13
1 line of Datatran Message
nd
14 2 line of Datatran Message
rd
15 3 line of Datatran Message
th
16 4 line of Datatran Message
4. Enter up to 32 three-character codes and press the SBTL key. (See "Descriptor Code
Chart" on page 78.)
5. Press the CASH key to finalize the program.
CASH
SBTL
SBTL
P-Mode Programming  115