Sam4s ER-380 Operator's Manual page 114

Programming Group Descriptors
112  P-Mode Programming
1. Turn the control lock to the P position.
2. To begin the program, enter 9 1 0, press the SBTL key.
9 1 0
3. Enter the number (1-20) of the group you wish to program; press the X/TIME key.
X/TIME
4. Enter up to 12 three-character codes and press the X/TIME key. (See "Descriptor Code
Chart" on page 78.)
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
5. To program additional groups, repeat from step 3, or press the CASH key to finalize the
program.
CASH
SBTL
ER 380/380M Electronic Cash Register v2.9
SBTL