Important Assembly Steps Before The First Flight - ROBBE BLUE ARROW NANO LOOP 2.4 GHz Operating Instructions Manual

Important assembly steps before the fi rst fl ight
Fitting the canopy:
Fit the canopy before the fi rst fl ight. On the lower edge of the
canopy there are four cut-outs. The canopy is fi xed to the four
motor arms. It is most important to check the correct position of
the canopy relative to the fl ight direction: black propeller = front,
orange propeller = rear (see drawing).
black propeller
front
Operating Instructions,BLUE ARROW NANO LOOP 2.4 GHz No. S2531
orange Propeller
rear
Receiver outputs
Monitor LED
Gyro adjustment knob
(Here the
Gyro sensitivity will be
adjusted).
right hand front motor
left hand
front motor
tight hand tail rotor motor
left hand tail rotor motor
external
connection socket
AUX2
(this connection is
unnecessary)
Battery lead
9