Transmitter Settings - ROBBE BLUE ARROW NANO LOOP 2.4 GHz Operating Instructions Manual

Transmitter settings

Throttle-Reverse-setting
3. Click on "ENT". Use the transmitter settings select button for
"THRO". The "THRO" and "NOR" fl ash. Select between NOR or
REV using R or L buttons. Press ENT to select and EXT to fi nish
the set up.
YAW-Reverse-setting
Click on "ENT". Use the select button for transmitter settings to
"RUDD". The "RUDD" display and "NOR" will fl ash.Select between
"NOR" or "REV" using R or L buttons. Press "ENT" to select and
"EXT" to fi nish the set up.
Operating Instructions,BLUE ARROW NANO LOOP 2.4 GHz No. S2531
Transmitter settings
BUZZER-setting
3. Click on "ENT". Use the transmitter settings button select "BUZZ".
The "BUZZ" display and "ON" fl ashes. Select between "ON" or
"OFF" using R or L buttons. Press "ENT" to select and "EXT" to
fi nish the set up.
MODE Setting
3. Click on "ENT". Use the transmitter settings button to "STICK MOD
1". The "STICK MOD" display fl ashes.Select the MODE setting (1 -
4*) using R or L buttons. Press "ENT" to select and "EXT" to fi nish
the set up.
(*- Stick mode see page 8)
11