Changing The Transmitter Throttle Stick - ROBBE BLUE ARROW NANO LOOP 2.4 GHz Operating Instructions Manual

Changing the transmitter throttle stick

1. Open the battery box cover. Remove the
battery retainer, unplug the battery plug
A
from the socket in the transmitter.
2. Remove the transmitter rear cover. This
C
is done by removing the six retaining
screws on the rear face.
B
Fig. 1
3. Unscrew screws "A" and "B" and remove
the throttle spring "C". Now loosen the
fi xing screw "D" (Fig 2).
4. Move the return spring to the and re-
place the retaining screw "D". Retain the
D throttle spring "C" with screws "A" and "B"
(Fig 3). Using screw "A", one can set the
Fig. 2
pressure of the throttle spring. Check the
correct function of the joysticks. Screw
the backplate on and replace the battery
B
box.
D
C
Important: to avoid damaging the trans-
A
mitter components, please work in a ca-
Fig. 3
reful manner.
8
Operating Instructions,BLUE ARROW NANO LOOP 2.4 GHz No. S2531
Using the
transmitter menu
the following
modes can be
adjusted
(see page 11):
front
black propeller
rear
(orange propeller)
Rotational Rotational
Pitch-axis
speed speed
Roll-
Yaw
Yaw
axis
Rotational
Rotational
speed
Pitch-axis
speed
Roll- Roll-
Yaw
axis axis
Pitch-axis
Roll-
axis
Pitch-axis
Yaw