Table Of Contents - ROBBE BLUE ARROW NANO LOOP 2.4 GHz Operating Instructions Manual

Explanation of specialist terms:
Climb and descent ("Throttle/pitch"): This controls the
model's climb and descent.
Yaw: The model's movement around the vertical axis;
the helicopter rotates to right or left.
Elevator: The model's movement around the lateral
axis,
forward or reverse flight
Roll: The model's movement around the longitudinal
axis,
sideways movement to right or left
Mode 1: Function assignment of the control move-
ments relative to the stick movements.
In this case collective pitch / motor speed (throttle) and
roll are controlled by the right-hand stick; pitch-axis
and tail rotor by the left-hand stick.
Mode 2: Function assignment of the control move-
ments relative to the stick movements.
In this case collective pitch / motor speed (throttle) and
tail rotor are controlled by the left-hand stick; pitch-axis
and roll by the right-hand stick.
Dual Rate: Switchable travel reduction for control mo-
vements.
Binding: Creating the radio link between transmitter
and receiver.
2
Operating Instructions,BLUE ARROW NANO LOOP 2.4 GHz No. S2531
Contents
Explanation of specialist terms / Contents
Safety Notes
Set contents / Specification / Recommended accessories
Transmitter description Mode 1 + 3
Transmitter description Mode 2 +4
Changing the transmitter throttle stick
Important assembly steps before the first flight
Receiver outputs
Transmitter LCD display
Transmitter settings
Charging the battery / LiPo battery safety notes
Flight preparation normal and stunt modes
Trim adjustments in Mode 1 / Mode 2
Trim adjustments in Mode 3 / Mode 4
Controlling the model in Mode 1 / Mode 2
Controlling the model in Mode 3 / Mode 4
Important advice / The first few flights
Spare parts
Page
2
3, 4
5
6
7
8
9
9
10
10, 11
12
13
14
15
16
17
18
19