2N Helios IP Verso Installation Manual page 87

Keypad Module
The Keyboard module is one of the
provides a numerical input in the system.
The module contains two
These two connectors are fully interchangeable and can be used both as inputs
from the basic unit and outputs to other modules.
If this module is the last one on the bus, one of the connectors remains
unconnected.
The module package includes a 220 mm long interconnecting cable.
RFID Card Reader Module, 125 kHz
The 125 kHz RFID card reader is one of the
and is used for reading RFID card Ids in the 125 kHz band.
The module contains two
These two connectors are fully interchangeable and can be used both as inputs
from the basic unit and outputs to other modules.
If this module is the last one on the bus, one of the connectors remains
unconnected.
The module package includes a 220 mm long interconnecting cable.
The following RFID cards can be read:
EM4100, EM4102, HID Proximity
RFID Card Reader Module, 13.56 MHz
The 13.56 MHz RFID card reader is one of the
elements and is used for reading RFID card Ids in the 13.56 MHz band.
The module contains two
These two connectors are fully interchangeable and can be used both as inputs
from the basic unit and outputs to other modules.
If this module is the last one on the bus, one of the connectors remains
unconnected.
The module package includes a 220 mm long interconnecting cable.
The following RFID cards can be read:
ISO14443A – Mifare Classic 1k & 4k, DESFire EV1, Mini, Plus S&X, SmartMX,
Ultralight, Ultralight C, SLE44R35, my-d move (SLE66Rxx), PayPass, Legic
Advant
ISO14443B – Calypso, CEPAS, Moneo, SRI512, SRT512, SRI4K, SRIX4K,
PicoPass, HID iCLASS
®
2N TELEKOMUNIKACE a.s., www.2n.cz
®
2N Helios IP Verso
®
2N Helios IP Verso
®
2N Helios IP Verso
®
2N Helios IP Verso
®
2N Helios IP Verso
intercom elements and
bus connectors.
intercom elements
bus connectors.
®
2N Helios IP Verso
bus connectors.
intercom
87