LifeSpan PERFORMER PLUS User Manual page 8

(2)"start/stop" button
When the machine is ready for use，press it to run under 1km/h, while press it again, machine
stops.
(3)" music" button
Press this button, play music; while press it again, music stops.
(4)"clear" button
In the state of initialization or operation, press it, all the figures are cleared to zero.
(5)"set" button
In the state of initialization, press it, time, distance, calorie can be set. Press "speed-up" and
"speed-down", speed is set.
(6)"mode" button
Press it, three modes can be chosen.
1. C1-C3: runner's setting modes, runner can make the modes by themselves, and can be
recorded by machine automatically. 30 minutes for one mode. The younger under 16-age are
not allowed to use this function.
2. P1-P9: speed modes, the speed is changed per minute under the chosen program, 30 minutes
for one mode.
3. P10-P12: speed and incline modes, speed and incline are changed per minute under the
chosen program, 30 minutes for one mode. The younger under 16-age are not allowed to use
this function.
(7）"incline 3"button
Press it, incline turns to 3
(8) "incline 6"button
Press it, incline turns to 6
(9) "incline 9"button
Press it, incline turns to 9
(10) "incline up" button
Press it, incline increases by 1level per time
（11）"incline down" button
Press it, incline decreases by 1level per time
（12）"speed 3"button
LIFESPAN PERFORMER PLUS 7