Exercise Guide - LifeSpan PERFORMER PLUS User Manual

belt).
3. If the running belt moves then displays the E1 error replace the speed sensor.
4. If the running belt does not move replace the controller.
E2: Controller problem
1. Replace the controller
2. Check the wire connection
E3: Over speed protection. (Sudden increase of running belt speed).
1. Check the speed sensor and magnet are in correct alignment and that there are no
obstructions on the magnet.
2. Check wire connections on the controller.
3. Replace the speed sensor.
4. Replace the controller.
E4: Incline fault
1. Replace incline motor.
2. If problem remains replace controller.
When alarm signals are displayed, single press 'CLEAR' to reset the displays and try
again.
No Power
1. Check fuses (They are located on the controller under the motor cover next to the on/off
switch.
2. Check power outlet (Plug something else into the power outlet to ensure that the power
outlet is working correctly).
3. Check Power Cable (You may need to take it to an electrician).
PLEASE NOTE: Before beginning any exercise program, consult you physician. This is

7. EXERCISE GUIDE

LIFESPAN PERFORMER PLUS 24