Transport; Programmable Operations; To Select A Program; User Program - LifeSpan PERFORMER PLUS User Manual

Place the folded treadmill in a spacious area. Then pull down the footplate till it is unlocked.
Please stand back for more than 1.5 meters and release it, then it will open automatically.

4.9.3 Transport

Carefully lift the treadmill at the rear roller area, grasping the two side end caps, and roll the
treadmill away.

4.10 Programmable Operations

This treadmill offers 3 user programs (C1, C2, C3) and 12 present programs (P1,P2,P3......P12,
see attachment). The first 9 preset programs (P1 to P9) are only for speed; the last 3 preset
programs (P10 to P12) are a combination on speed and incline. Be careful when using the last
3 present programs as they are designed for advanced users. Children under 16 years of age
are not recommended to use the last 3 preset programs.
Each preset program has a maximum speed level that is displayed when a desired workout is
chosen. The speed that the particular program will achieve will be displayed in the Speed
window. Each program has various speed changes throughout.

4.11 To Select a Program:

 Make sure the machine is in the stop position, single press 'clear' to enter into resetting state.
Press 'MODE' to choose desired program (P1,P2, .....P12), then press and release
'START/STOP' to begin the program with default values.
 The speed window will now be showing the preset speed of the selected program.
 Each program will continue 30 minutes. After every one minute program and speed can be
altered manually or automatically. 3 Seconds before the ending of program a buzzer will
sound three times, then the running belt will come to a stop.

4.12 User Program

In the resetting state, select C1, C2 and C3 by pressing the 'mode' key once. Then press 'clear',
LIFESPAN PERFORMER PLUS 10