Installing The Power Supply Unit Blank - Dell PowerEdge R930 Owner's Manual

Figure 44. Removing and installing the PSU blank
1. tab at the bottom of PSU blank
3. tab on the PSU blank (2)
5. slot at the bottom of the chassis
Next steps
Install the PSU or PSU blank.
Related Tasks
Installing an AC power supply unit

Installing the power supply unit blank

Installing the power supply unit blank
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
Ensure that you follow the
NOTE: Install the power supply unit (PSU) blank only in the second PSU bay.
Steps
1. Align the tabs on the PSU blank with the slots on the chassis.
2. Insert the top of the PSU blank into the PSU bay first, and then the bottom.
Safety instructions.
2. PSU blank
4. slot on the chassis (2)
123