Convention
D
E
Next steps
Install the internal dual SD module.
Related Tasks
Removing an internal SD card
Installing the internal dual SD module
Installing the internal dual SD module
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
Ensure that you follow the
Steps
1.
Align the connector on the NDC riser card with the IDSDM connector.
2.
Push IDSDM until it is firmly seated on the NDC riser card.
Next steps
1.
If removed, install the internal SD cards.
2.
Follow the procedure listed in
Related Tasks
Installing an internal SD card
Integrated storage controller card
Your system supports both single and dual storage controller card options. Your system includes a
dedicated expansion card slot on the system board for the primary integrated SAS or PERC controller
card. The Integrated storage controller card provides the integrated storage subsystem for your system's
internal hard drives. Install the secondary storage card must be installed in slot 8. The controller supports
SAS and SATA hard drives, and also enables you to set up the hard drives in RAID configurations as
supported by the version of the storage controller included with your system.
106
IDSDM indicator code
Amber
Not lit
Safety
instructions.
After working inside your
Description
Indicates that the card is offline, has failed, or is
write protected
Indicates that the card is missing or is booting
system.