Removing An Internal Sd Card; Installing An Internal Sd Card - Dell PowerEdge R930 Owner's Manual

Removing an internal SD card

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1. Ensure that you follow the
2. Follow the procedure listed in
Steps
1. Locate the SD card slot(s) on the Internal Dual SD Module (IDSDM).
2. Press the SD card to release it from the slot, and remove the card.
Next steps
Install the internal SD card.
Related Tasks

Installing an internal SD card

Installing an internal SD card
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
NOTE: To use an SD card with your system, ensure that Internal SD Card Port is enabled in System
Setup.
Ensure that you follow the
Steps
1. Locate the SD card slot(s) on the Internal Dual SD Module (IDSDM).
NOTE: The slot is keyed to ensure correct insertion of the SD card.
2. Align the SD card appropriately and insert the contact-pin end of the card into the SD card slot.
3. Press the SD card into the card slot to lock it into place.
4. Repeat steps 1 and 2 to insert the second SD card on the other side of IDSDM.
Next steps
Follow the procedure listed in
Safety instructions.
Before working inside your
Safety instructions.
After working inside your
system.
system.
103