Installing The Left Expansion Card Riser; Removing The Right Expansion Card Riser - Dell PowerEdge R930 Owner's Manual

Installing the left expansion card riser

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
Ensure that you follow the
Steps
1. Holding the expansion card riser by its sides, align the riser with the riser panel slot and the
connector on the system board.
2. Insert the expansion card riser into the system.
NOTE: Note that the riser edge slides into the riser guide on the system board.
3. Insert the riser edge connector into the connector on the system board until the riser is fully seated.
Next steps
Follow the procedure listed in

Removing the right expansion card riser

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1. Ensure that you follow the
2. Follow the procedure listed in
3. Remove the right expansion card riser blank.
Steps
1. Holding the riser handle, pull the expansion card riser in the direction of the arrows on the handle.
2. Lift the expansion card riser away from the system.
Next steps
1. Install the expansion card into the right expansion card riser.
2. Install the right expansion card riser.
Related Tasks
Removing the right expansion card riser blank
Installing an expansion card into the expansion card risers
Installing the right expansion card riser
92
Safety instructions.
After working inside your
Safety instructions.
Before working inside your
system.
system.