Table of Contents
Advertisement
Next steps
1.
Install the memory riser.
2.
Follow the procedure listed in
3.
Press F2 to enter System Setup, and check the System Memory setting.
The System Memory Size value should reflect the installed memory.
4.
If the System Memory Size value is incorrect, one or more of the memory modules may not be
installed properly. Ensure that the memory modules are firmly seated in their sockets.
5.
Run the system memory test in system diagnostics. See
Related Tasks
Installing a memory riser
Memory riser and fan cage
Removing the memory riser and fan cage
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1.
Ensure that you follow the
2.
Follow the procedure listed in
3.
Remove the following:
a.
Memory risers
b.
Cooling fans
c.
Memory riser blanks, if installed
WARNING: To avoid damage to the memory riser and fan cage, you must remove all the
memory risers and cooling fans before removing the memory riser and fan cage.
Steps
1.
Slide the cage handle lock in the direction of the arrow.
2.
Holding the cage handle and rear handle, lift the memory riser and fan cage away from the system.
70
After working inside your
Safety
instructions.
Before working inside your
system.
Using system
diagnostics.
system.
Advertisement
Table of Contents
Troubleshooting
