Removing The Fan Tray - Dell PowerEdge R930 Owner's Manual

Steps
1. Align the connector on the cooling fan with the connector on the fan tray.
2. Holding the release tabs, insert the cooling fan into the memory riser and fan cage with the arrow
pointing toward the back of the system.
3. Lower the cooling fan until connector on the cooling fan engages with the connector on the fan
tray.
The release tabs click into place when the cooling fan is firmly seated.
Next steps
Follow the procedure listed in

Removing the fan tray

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1. Ensure that you follow the
2. Follow the procedure listed in
3. Remove the following:
a. Memory risers
b. Cooling fans
c. Memory riser and fan cage
d. Memory riser blanks, if installed
Steps
1. Loosen the captive screws in the order of the numbers printed on the fan tray.
2. Hold the fan tray by its edges and lift the fan tray out of the system.
82
After working inside your
Safety instructions.
Before working inside your
system.
system.