POSITIONING:
The CD425 is designed for indoor use only.
Position the dehumidifier unit in the centre of the room to be conditioned if at
all possible. Using a spirit level ensure the unit is level in both directions.
Failure to do so may result in the drain tray overflowing and flooding of the
chamber.
NOTE: Both inlet grille and outlet grille of the dehumidifier unit must have
clear space around them and not be obstructed in anyway.
Minimum installation requirements.
250mm
A gap of at least 1000mm is required above the dehumidifier.
INSTALLATION
AIR IN
AIR OUT
AIR IN
Page 4 of 13
Drawing : - TPC127A
Issue
Date
1000mm
1000mm
: - 2
: - 28/05/12
250mm