EIP CD425 Owner's Manual page 5

WIRING:
The CD425 should be connected to a suitably protected, 16A, 3 phase mains
power supply.
A recognized means of disconnecting the dehumidifier from the supply must
be incorporated into the fixed wiring to the unit in accordance with the latest
wiring regulations.
Connect the supply cable to the MAINS T/B terminal block inside the electrical
box located at the control panel end of the machine.
Wiring connections to MAINS Terminal Block
DRAINAGE:
Connect the outlet from the drain tray (located behind the front grille and
under the evaporator coils) to a permanent drain. Please ensure that the
drainage does not rise above the level of the CD425's drain tray. Failure to
observe this requirement will result in internal flooding of the dehumidifier unit.
L1 L2 L3 N
Page 5 of 13
Drawing : - TPC127A
Issue : - 2
Date : - 28/05/12