Disconnecting Cables; Basic Settings - Wincor Nixdorf Beetle/60 User Manual

Disconnecting cables

Disconnecting cables
Never unplug a cable by pulling on the cable itself; always take hold of the
actual plug. Follow the procedure below when disconnecting cables:
Turn off all power and equipment switches.
Unplug all power plugs from the grounded-contact utility power
sockets.
Unplug all data communication cables from the sockets of the data
networks.
Unplug all cables from the devices.
Now remove the connector from the socket.

Basic settings

Ex works, the BEETLE POS system is configured to your order. Your
configuration must be subsequently adapted to support supplementary
devices such as scanners. For more information, please contact the WN
branch office responsible for your area.
GB - 14
Disconnecting cables
POS terminal and system
The Mini-DIN
connectors remain
connected until they
are unlocked.
Use your thumb to
move the plastic
casing around the
connector shell away
from the socket. This
unlocks it, and the
metal on the con-
nector becomes
visible.