Compal JHT01 Service Manual page 32

JHT01 Service Manual
Change Option: No Change, Enable, Disable, Activate, Deactivate, Clear, Enable and Activate,
Deactivate and Disable, SetOwnerInstall with state=True, SetOwnerInstall with state=False,
Enable + Activate + SetOwnerInstall_True, Deactivate + Disable + SetOwnerInsstall_False, Clear
+ Enable + Activate
10.2.3 Exit
Exit Saving Changes
Exit Discarding Changes
Load Setup Defaults
Discard Changes
Save Changes
F1 Help
Esc Exit
Exit Saving Changes
Allows the user to save changes to CMOS and reboot system. The following message is prompted
when user press "Enter" on the item.
Setup Confirmation
Save configuration changes and exit now?
[Yes]
Yes: Exit SETUP and reboot
No: Return to SETUP
2-16
Phoenix SecureCore(tm) Setup Utility
↑↓ select Item
F5/F6 Change Values
←→ select menu Enter Select 4 Sub-Menu F10 Save and Exit
[No]
F9 Setup Defaults