Compal notebook User Manual

Hide thumbs Also See for notebook:
Table of Contents

Advertisement

This user's manual is designed to let you easily find the information you need to
get the most from your notebook.
• Introduces you to the features of your notebook.
• Gives you useful details on using your notebook.
• Tells you how to look after your notebook, whether at home or traveling.
• Talks about PCI Express Card peripherals and how to use them.
• Goes into more detail about power management and explains how to
conserve power while on the move.
• Introduces you to BIOS, the nervous system of your computer, and how to
change its fundamental settings.
There is no need to read the manual from the beginning to end. Simply find your
way to the section that interests you using the table of contents, or browse
through the manual.
You will come across the following icons in this manual:
Helpful pointers and tricks to get more from your notebook
To help you note and avoid possible damage to your notebook's hardware
or software, or loss of your work
Points out possible damage to property, personal injury or death
Information in this document is subject to change without notice.
© Compal Electronics, Inc. 2007. All rights reserved.
Trademarks used in this document: Microsoft and Windows are registered
trademarks of Microsoft Corporation.
Other trademarks and trade names may be used in this document to refer to
either the entities claiming the marks and names or their products.
About this User's Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the notebook and is the answer not in the manual?

Questions and answers

Summary of Contents for Compal notebook

  • Page 1 • Introduces you to the features of your notebook. • Gives you useful details on using your notebook. • Tells you how to look after your notebook, whether at home or traveling. • Talks about PCI Express Card peripherals and how to use them.
  • Page 2: Table Of Contents

    Contents Safety Instructions..................i Modem Regulatory Notice..............v Specifications..................x Chapter 1 Introducing Your Notebook Front Side ................... 1-1 1.1.1 Built-in Camera................1-2 1.1.2 Built-in Microphone................1-2 1.1.3 Display..................... 1-2 1.1.4 Top Panel Buttons and LEDs............1-2 Left Panel Buttons ................1-3 1.1.5 1.1.6...
  • Page 3 Chapter 2 Operating Your Notebook (XP) Turning Your Notebook On and Off ..........2-1 2.1.1 Turning Your Notebook On .............. 2-2 2.1.2 Turning Your Notebook Off .............. 2-2 2.1.3 Logging Off ..................2-2 2.1.4 Adding User Accounts ..............2-3 2.1.5 Standby Mode .................
  • Page 4 Inserting Discs ................2-31 2.9.2 Adjusting the Volume..............2-31 2.9.3 Adjusting the Picture..............2-31 Chapter 3 Operating Your Notebook (Vista) Turning Your Notebook On and Off ..........3-1 3.1.1 Turning Your Notebook On .............. 3-2 3.1.2 Turning Your Notebook Off .............. 3-2 3.1.3 Logging Off ..................
  • Page 5 Packing Your Notebook ..............4-5 4.2.3 Setting a Password................4-5 4.2.4 Travel Tips ..................4-6 4.2.5 If Your Notebook is Lost or Stolen ........... 4-6 Chapter 5 Peripherals PCI Express Cards ................5-1 5.1.1 PCI Express Card Types ..............5-2...
  • Page 6 Removing a PCI Express Card............5-3 Adding and Removing SD/MMC/MS Cards ........5-4 Memory Modules................5-5 Chapter 6 The Power System (XP) Power Management ................6-1 6.1.1 Managing Your Notebook’s Power........... 6-2 6.1.2 Power Management Modes............. 6-2 6.1.3 Power Options Properties..............6-4 6.1.4 SpeedStep ..................
  • Page 7 Chapter 8 The BIOS Setup Program Introduction ..................8-1 Navigating through the BIOS Setup Program........8-2 8.2.1 Accessing the BIOS Setup Program ..........8-3 8.2.2 Launching Submenus..............8-4 8.2.3 Saving Changes and Exiting the Setup Program ......8-4 The Main Menu ................... 8-5 The Advanced Menu ................
  • Page 8: Safety Instructions

    Safety Instructions Safety Instructions Use the following safety guidelines to help protect yourself and your computer. General Warnings • Do not operate your portable computer for an extended period of time with the base resting directly on your body. With extended operation, heat can potentially build up in the base.
  • Page 9 Safety Instructions • If acid leaking from the battery pack contacts your skin or clothing, immediately wash it away with running water. Otherwise, skin inflammation can occur. • Operate the computer at the recommended temperature range of +5 C to +35 (+41 F to +95 F).
  • Page 10 Safety Instructions • Place the AC adapter in a ventilated area, such as a desktop or on the floor, when you use it to run the computer or to charge the battery. Do not cover the AC adapter with papers or other items that will reduce cooling; also, do not use the AC adapter while it is inside a carrying case.
  • Page 11 Safety Instructions Battery Pack Disposal Dispose of the lithium ion battery packs at approved disposal sites only. To locate an − appropriate site, contact the solid waste disposal officials where you live or look for a rechargeable battery recycling website that lists disposal locations near you. Do not dispose of battery packs in a fire, throw them in a trash receptacle, put them −...
  • Page 12: Modem Regulatory Notice

    Modem Regulatory Notice Modem Regulatory Notice Federal Communication Commission PART 68 Warning This equipment complies with Part 68 of the FCC rules. Located on the bottom side of the modem is a label that contains, among other information, the FCC Registration Number and Ringer Equipment Number (REN) for this equipment.
  • Page 13 Modem Regulatory Notice Important Safety Instructions Read these instructions carefully. Save these instructions for future reference. Follow all warnings and instructions marked on the product. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. Do not use this product near water.
  • Page 14: Fcc Notice

    Modem Regulatory Notice will often require extensive work by a qualified technician to restore the product to normal condition. If the product has been dropped or the cabinet has been damaged. If the product exhibits a distinct change in performance, indicating a need for service.
  • Page 15 CE Notice (European Union) EU Declaration of Conformity BSMI Notice (Taiwan Only) Most Compal computer products are classified by the Bureau of Standards, Meteorology and Inspection (BSMI) as Class B information technology equipment (ITE). This (marked on the product) indicates the product complies with the BSMI standard.
  • Page 16 Modem Regulatory Notice BSMI 通告 (僅限於台灣地區) 如果您在電腦的底部、側面或背面板上找到一個 標誌,則適用於以下部份 的相關規定: Macrovision License of Notice This product incorporates copyright protection technology that is protected by methods and claims of certain U.S. patents and other intellectual rights owned by Macrovision Corporation, and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation and is intended for home and other limited viewing uses only unless authorized by Macrovision Corporation.
  • Page 17: Specifications

    Specifications Specifications • Intel Mobile Merom & Merom ICPM, Socket P, FSB800/667 MHz • MAX 4M L2 Cache • Dual Core • Micro FC-PGA package CPU Chipset • Intel PM965 / Intel GM965 • 667/800 MHz FSB supported • ICH8-M Memory •...
  • Page 18: Pointing Device

    Specifications Optical Disc Drive (ODD) • 5.25” 12.7mm height 24X DVD/CD-RW Combo Drive • 5.25” 12.7mm height 8XDVD-Super Multi Drive Pointing Device • Touch Pad with two buttons − Left button − Right button • Finger printer I/O Ports • USB 2.0 ports x 2 •...
  • Page 19: Easy Buttons

    Specifications Bluetooth • Foxconn Bluetooth V2.0+EDR (Broadcom chipset) Mini Card Organization • One Mini card slot for WLAN • One Mini card for TV-Tuner • One Mini card for Robson NEWCARD • One Single-Wide New Card socket • Supports both PCI-Express Card and USB2.0 Card Excellent Power Management Function •...
  • Page 20 Specifications Options • 256MB/512MB/1GB/2GB SO-DIMM DDR-II modules • Li-ION Battery Pack • PCI-E Wireless module xiii...
  • Page 21: Chapter 1 Introducing Your Notebook

    Chapter 1 Introducing Your Notebook...
  • Page 22: Front Side

    1 Introducing Your Notebook 1.1 Front Side The following picture shows the front side of the notebook. Built-in Camera Finger Printer Built-in Microphone Touch Pad Display Touch Pad Buttons Power Button Consumer Infrared Receiver (optional) Easy Buttons Wireless Communication Switch...
  • Page 23: Top Panel Buttons And Leds

    1.1.4 Top Panel Buttons and LEDs - Power Button: Press to turn your notebook on. For more on power settings, see 6.1 Power Management (XP) or 7.1 Power Management (Vista). Windows XP or Vista, which comes preinstalled, goes into the shutdown sequence automatically if you press the power button while on.
  • Page 24: Left Panel Buttons

    1 Introducing Your Notebook - Keyboard Indicators: HDD access indicator Num Lock On/Off indicator Caps Lock On/Off indicator Scroll Lock On/Off indicator 1.1.5 Left Panel Buttons USB Buttons Q-Charging button Power USB button 1.1.6 Keyboard ® ® The keyboard includes a numeric keypad and the Microsoft Windows logo key.
  • Page 25: Touch Pad Buttons

    1.1.10 CIR (Optional) The CIR is an infrared receiver, which allows your notebook to work with a remote control to create a TV/ Multimedia environment (Power Cinema). Make sure you position the remote accurately so that the CIR can receive the signal.
  • Page 26: Wireless Communication Switch

    Turns the wireless communication function on or off. The wireless communication LED on the front panel lights when the function is activated. 1.1.12 Device Status Indicators / Power Status The LEDs on the front of notebook indicate the device and power status. Power On (Blue) Battery Charge (Blue/Amber)
  • Page 27: Right Side

    1 Introducing Your Notebook 1.2 Right Side The following picture shows the right side of the notebook. Optical Media Drive USB Ports RF-in Connector S-Video in Port AC Adapter Connector...
  • Page 28 Use this port to connect an antenna set. See 1.1.3 Display. 1.2.4 S-Video in Port The S-Video in port allows you to connect a video output device, like a VCR, TV, camcorder or device which has S-video port, to the notebook.
  • Page 29 1 Introducing Your Notebook 1.2.5 AC Adapter Connector Use this connector to attach the AC adapter to your notebook. You can connect an AC adapter when your notebook is switched on or off. While the AC adapter works with electrical outlets worldwide, power connectors and power strips vary by country.
  • Page 30: Left Side

    1 Introducing Your Notebook 1.3 Left Side The following picture shows the left side of the notebook. VGA Port LAN Jack (Green/Amber) Modem Jack S-Video out Port High Power USB Ports IEEE 1394 Port New Card Slot Multiple Digital Media Slot...
  • Page 31: Lan Jack

    (LAN). Be careful not to plug the telephone line into the slightly larger network connector. 1.3.3 Modem Jack The modem jack allows you to connect the notebook to a telephone line with a standard RJ-11 connector. 1.3.4 S-Video out Port The S-Video out port allows you to connect an external display device, like a TV set or device which has S-video port, to the notebook.
  • Page 32: Audio Ports

    1 Introducing Your Notebook 1.3.9 Audio Ports You can connect a headphone or an external speaker to the port and a microphone to the port. The built-in speakers are disabled when a device is connected to the port. 1-11...
  • Page 33: Rear Side

    1 Introducing Your Notebook 1.4 Rear Side The following picture shows the rear side of the notebook. 1-12...
  • Page 34: Bottom Side

    1 Introducing Your Notebook 1.5 Bottom Side The following picture shows the bottom side of the notebook. Battery Pack Battery Release Latch HDD Cover Battery Lock Switch Thermal Cover Memory Module Cover 1-13...
  • Page 35 1 Introducing Your Notebook 1.5.1 Battery Pack With a charged battery pack installed, you can use your notebook without connecting it to an electrical outlet. For more details, see 6.2 Battery (XP) or 7.2 Battery (Vista). To remove the Battery Pack: 1.
  • Page 37 Chapter 2 Operating Your Notebook (XP)
  • Page 38: Turning Your Notebook On And Off

    2 Operating Your Notebook (XP) 2.1 Turning Your Notebook On and Off Turning Your Notebook On Turning Your Notebook Off Logging Off Adding User Accounts Standby Mode...
  • Page 39: Turning Your Notebook On

    DVD software, from running. Fast User Switching does not work if your notebook is running Windows XP Professional and is a member of a computer domain or if the notebook has less than 128 MB of memory.
  • Page 40: Adding User Accounts

    2 Operating Your Notebook (XP) 2.1.4 Adding User Accounts Different account options are available when a computer is running Windows XP Professional operating system and is connected to a domain. With Windows XP installed, the system administrator or a user with administrator rights can create additional user accounts: 1.
  • Page 41: Tips For Using Windows

    2 Operating Your Notebook (XP) 2.2 Tips for Using Windows Microsoft Windows XP Help Windows Desktop Desktop Cleanup Wizard Start Button Taskbar Notification Area (System Tray) Recycle Bin Control Panel My Computer...
  • Page 42: Microsoft Windows Xp Help

    2 Operating Your Notebook (XP) 2.2.1 Microsoft Windows XP Help For Microsoft Windows XP help, click the Start menu then click the Help and Support icon. The Help and Support Center dialog box opens.
  • Page 43: Windows Desktop

    2 Operating Your Notebook (XP) 2.2.2 Windows Desktop Depending on your notebook setup and software, your desktop may have different or additional shortcuts. See 2.4 Personalizing Your Desktop for more information.
  • Page 44: Desktop Cleanup Wizard

    Start menu, no matter how often it's used, right-click the item and click Pin to Start menu. Log Off allows the current user to log off so a new user can log on to the notebook using his personal settings.
  • Page 45: Taskbar

    2 Operating Your Notebook (XP) 2.2.5 Taskbar The Start button is on the left and the notification area on the right. Each time you open a program, a button for it appears on the taskbar. To toggle taskbar buttons, click the relevant button.
  • Page 46: Control Panel

    My Computer allows you to see the disk drives and other external devices connected to your notebook. The My Computer icon appears on your Desktop. To see the contents of a drive or folder, open My Computer then double-click the icon for the drive or folder you want to view (for example, drive C).
  • Page 47: Keyboard And Touch Pad

    2 Operating Your Notebook (XP) 2.3 Keyboard and Touch Pad Numeric Keypad Keyboard Shortcuts Windows Logo Key Functions StickyKeys Touch Pad Customizing the Touch Pad Finger Printer 2-10...
  • Page 48: Numeric Keypad

    2 Operating Your Notebook (XP) 2.3.1 Numeric Keypad Keypad numbers and symbols are marked in blue on the lower right edge of the keypad keys. To enable the numeric keypad, press indicator will light when the numeric lock is on.
  • Page 49: Windows Logo Key Functions

    Opens the Search Results dialog box Opens the Search Results - Computers dialog box (when your notebook is connected to a network) Opens the System Properties dialog box To adjust keyboard operation, including character repeat rate, in the Control Panel click Printers and Other Hardware >...
  • Page 50: Stickykeys

    2 Operating Your Notebook (XP) 2.3.4 StickyKeys The StickyKeys function lets you use the SHIFT, CTRL, ALT, FN keys or the Windows logo key (referred to as modifier keys) in conjunction with other keys by pressing one key at a time instead of simultaneously.
  • Page 51 2 Operating Your Notebook (XP) To further customize StickyKeys, click Settings in either of the above dialogue boxes. The following dialogue box will appear. Click Use shortcut to enable the listed shortcut to activate StickyKeys mode. By checking Press modifier key twice to lock, pressing the SHIFT, CTRL, ALT, FN or the Windows logo key twice will 'lock' the key until it is pressed again.
  • Page 52: Touch Pad

    2 Operating Your Notebook (XP) 2.3.5 Touch Pad The Touch Pad responds to the movements and pressure of your finger, allowing you to move the cursor around the screen, in the same way you would with a mouse. Place your fingers on the keyboard in the normal typing position.
  • Page 53: Finger Printer

    2 Operating Your Notebook (XP) 2.3.7 Finger Printer The finger printer lets you log on to your computer instead of inputting passwords from the keyboard. To raise the recognition success rate, the following illustrations show the correct way to swipe your finger over the finger printer.
  • Page 54 2 Operating Your Notebook (XP) 2.3.7.1 Delete the Finger Printer Data Saved fingerprint data is stored in the non-volatile memory inside the finger printer. Fingerprint data are recommended to delete before you hand over the computer the others, or dispose of it.
  • Page 55: Personalizing Your Desktop

    2 Operating Your Notebook (XP) 2.4 Personalizing Your Desktop Choosing a Wallpaper Choosing a Screen Saver Choosing a Desktop Theme Creating a Shortcut on the Desktop 2-18...
  • Page 56: Choosing A Wallpaper

    2 Operating Your Notebook (XP) 2.4.1 Choosing a Wallpaper To make your notebook reflect your style, you can set background colors, patterns, and the wallpaper on the desktop. Control Panel > Appearance and Themes > Pick a task > Change the desktop background.
  • Page 57: Display

    2 Operating Your Notebook (XP) 2.5 Display Adjusting the Brightness Using an External Monitor or Television Setting the Display Resolution 2-20...
  • Page 58: Adjusting The Brightness

    2 Operating Your Notebook (XP) 2.5.1 Adjusting the Brightness To conserve power when running your notebook from the battery, set the brightness to the lowest comfortable setting using the keyboard shortcuts. Brightness Down Brightness Up 2.5.2 Using an External Monitor or Television...
  • Page 59: Networks

    2 Operating Your Notebook (XP) 2.6 Networks To access a network: At the office, you can access a network via the built-in PCI-E LAN. For specific information about connecting to the LAN or WAN, consult your systems administrator. If you are working at home or while traveling, you need a dial-up connection. Ask your system administrator for the telephone number of the network.
  • Page 60: Managing Programs

    2 Operating Your Notebook (XP) 2.7 Managing Programs Running Programs Adding Software Removing Software 2-23...
  • Page 61: Running Programs

    Before installing software, check the software's technical requirements to ensure that it is compatible with your notebook and that there is enough memory and hard drive space for installation and operation. Temporarily disable your notebook's antivirus software before installing software. See the documentation that came with the antivirus software for detailed procedure.
  • Page 62: Removing Software

    2 Operating Your Notebook (XP) 2.7.3 Removing Software Once you've begun removing software, do not interrupt the process. To do so may result in data loss and corruption of your operating system. Start > Control Panel > Add or Remove Programs > Change or Remove Programs.
  • Page 63: Managing Files

    2 Operating Your Notebook (XP) 2.8 Managing Files Updating Antivirus Software Backing Up Files Finding Files Copying a File on the Hard Drive Copying a File to a Floppy Disk Moving Files Renaming Files Deleting Files Emptying the Recycle Bin...
  • Page 64: Updating Antivirus Software

    Your computer dealer can advise you regarding purchasing antivirus software. Before installing any software from unlicensed sources, scan for viruses. Regularly backup your data to safeguard against loss if your notebook is infected. 2.8.2 Backing Up Files Regularly backing up your files will protect you from losing data from accidental file deletion, viruses or hard drive failure.
  • Page 65: Copying A File To A Floppy Disk

    2 Operating Your Notebook (XP) 2.8.5 Copying a File to a Floppy Disk Insert a floppy disk into the external floppy drive. From the Desktop, select My Computer. Locate the file you want to copy, and click the file to select it.
  • Page 66: Emptying The Recycle Bin

    Click the File menu, and click Empty Recycle Bin. When the confirmation dialog box appears, click Yes to delete all file(s). All files disappear from the Recycle Bin and are removed from your notebook. 2.8.10 Retrieving Files From the Recycle Bin Deleted files are moved to the Recycle Bin and remain there until you empty the Recycle Bin.
  • Page 67: Playing Cds And Movies

    2 Operating Your Notebook (XP) 2.9 Playing CDs and Movies Inserting Discs Adjusting the Volume Adjusting the Picture 2-30...
  • Page 68: Inserting Discs

    4. Snap the disc onto the spindle. 5. Gently push the tray back into the drive. If your notebook has a CD-RW/DVD or DVD, you can watch movies. For more information on playing CDs or watching movies, click Help on the CD player software or DVD player software.
  • Page 69: Chapter 3 Operating Your Notebook (Vista)

    Chapter 3 Operating Your Notebook (Vista)
  • Page 70: Turning Your Notebook On And Off

    3 Operating Your Notebook (Vista) 3.1 Turning Your Notebook On and Off Turning Your Notebook On Turning Your Notebook Off Logging Off Adding User Accounts Sleep Mode...
  • Page 71: Turning Your Notebook On

    DVD software, from running. Fast User Switching does not work if your notebook is running Windows Vista and is a member of a computer domain or if the notebook has less than 128 MB of memory.
  • Page 72: Adding User Accounts

    3 Operating Your Notebook (Vista) 3.1.4 Adding User Accounts Different account options are available when a computer is running Windows Vista operating system and is connected to a domain. With Windows Vista installed, the system administrator or a user with administrator rights can create additional user accounts: 1.
  • Page 73: Tips For Using Windows

    3 Operating Your Notebook (Vista) 3.2 Tips for Using Windows Microsoft Windows Vista Help Windows Desktop Start Button Taskbar Notification Area (System Tray) Recycle Bin Control Panel Computer...
  • Page 74: Microsoft Windows Vista Help

    3 Operating Your Notebook (Vista) 3.2.1 Microsoft Windows Vista Help For Microsoft Windows Vista help, go to Start > Help and Support. The Windows Help and Support dialog box opens.
  • Page 75: Windows Desktop

    3 Operating Your Notebook (Vista) 3.2.2 Windows Desktop Depending on your notebook setup and software, your desktop may have different or additional shortcuts. See 3.4 Personalizing Your Desktop for more information.
  • Page 76: Start Button

    3 Operating Your Notebook (Vista) 3.2.3 Start Button The Start button allows easy access to your notebook's programs. The Start menu is designed to adapt to show the programs you use most frequently. To always keep an item on the Start menu, no matter how often it's used, right-click the item and click Pin to Start menu.
  • Page 77: Taskbar

    3 Operating Your Notebook (Vista) 3.2.4 Taskbar The Start button is on the left and the notification area on the right. Each time you open a program, a button for it appears on the taskbar. To move between programs, simply click the relevant button.
  • Page 78: Recycle Bin

    3 Operating Your Notebook (Vista) 3.2.6 Recycle Bin When you delete a file, it is moved to the Recycle Bin. Files can be restored from the Recycle Bin. Emptying the Recycle Bin deletes files permanently. 3.2.7 Control Panel In the Control Panel, you can change how Windows looks and works.
  • Page 79: Computer

    Computer then double-click the icon of the drive or folder you want to view (for example, drive C). You can also use Windows Explorer to see the contents of your notebook and find files. To open Windows Explorer, right-click the Start button and click Explore.
  • Page 80: Keyboard And Touch Pad

    3 Operating Your Notebook (Vista) 3.3 Keyboard and Touch Pad Numeric Keypad Keyboard Shortcuts Windows Logo Key Functions Sticky Keys Touch Pad Customizing the Touch Pad Finger Printer 3-11...
  • Page 81: Numeric Keypad

    3 Operating Your Notebook (Vista) 3.3.1 Numeric Keypad Keypad numbers and symbols are marked in blue on the lower right edge of the keypad keys. To enable the numeric keypad, press indicator will light when the numeric lock is on.
  • Page 82: Windows Logo Key Functions

    Opens the Search Results dialog box Opens the Search Results - Computers dialog box (when your notebook is connected to a network) Opens the System Properties dialog box To adjust keyboard operation, including character repeat rate, in the Control Panel click Hardware and Sound >...
  • Page 83: Sticky Keys

    3 Operating Your Notebook (Vista) 3.3.4 Sticky Keys The Sticky Keys function lets you use the SHIFT, CTRL, ALT, FN keys or the Windows logo key (referred to as modifier keys) in conjunction with other keys by pressing one key at a time instead of simultaneously.
  • Page 84 3 Operating Your Notebook (Vista) To further customize Sticky Keys, click Set up Sticky Keys in the above dialogue box. The following dialogue box will appear. Click Turn on Sticky Keys to enable the listed shortcuts to activate Sticky Keys mode.
  • Page 85: Touch Pad

    3 Operating Your Notebook (Vista) 3.3.5 Touch Pad The Touch Pad responds to the movements and pressure of your finger, allowing you to move the cursor around the screen, in the same way you would with a mouse. Place your fingers on the keyboard in the normal typing position.
  • Page 86: Finger Printer

    3 Operating Your Notebook (Vista) 3.3.7 Finger Printer The finger printer lets you log on to your computer instead of inputting passwords from the keyboard. To raise the recognition success rate, the following illustrations show the correct way to swipe your finger over the finger printer.
  • Page 87 3 Operating Your Notebook (Vista) 3.3.7.1 Delete the Finger Printer Data Saved fingerprint data is stored in the non-volatile memory inside the finger printer. Fingerprint data are recommended to delete before you hand over the computer the others, or dispose of it.
  • Page 88: Personalizing Your Desktop

    3 Operating Your Notebook (Vista) 3.4 Personalizing Your Desktop Choosing a Wallpaper Choosing a Screen Saver Choosing a Desktop Theme Creating a Shortcut on the Desktop 3-19...
  • Page 89: Choosing A Wallpaper

    3 Operating Your Notebook (Vista) 3.4.1 Choosing a Wallpaper To make your notebook reflect your style, you can set background colors, patterns, and the wallpaper on the desktop. Control Panel > Appearance and Personalization > Change desktop background. Choose the picture or color you want for your desktop background.
  • Page 90: Display

    3 Operating Your Notebook (Vista) 3.5 Display Adjusting the Brightness Using an External Monitor or Television Setting the Display Resolution 3-21...
  • Page 91: Adjusting The Brightness

    3 Operating Your Notebook (Vista) 3.5.1 Adjusting the Brightness To conserve power when running your notebook from the battery, set the brightness to the lowest comfortable setting using the keyboard shortcuts. Brightness Down Brightness Up 3.5.2 Using an External Monitor or Television...
  • Page 92: Networks

    3 Operating Your Notebook (Vista) 3.6 Networks To access a network: At the office, you can access a network via the built-in PCI-E LAN. For specific information about connecting to the LAN or WAN, consult your systems administrator. If you are working at home or while traveling, you need a dial-up connection. Ask your system administrator for the telephone number of the network.
  • Page 93: Managing Programs

    3 Operating Your Notebook (Vista) 3.7 Managing Programs Running Programs Adding Software Removing Software 3-24...
  • Page 94: Running Programs

    Before installing software, check the software's technical requirements to ensure that it is compatible with your notebook and that there is enough memory and hard drive space for installation and operation. Temporarily disable your notebook's antivirus software before installing software. See the documentation that came with the antivirus software for detailed procedure.
  • Page 95: Removing Software

    3 Operating Your Notebook (Vista) 3.7.3 Removing Software Once you've begun removing software, do not interrupt the process. To do so may result in data loss and corruption of your operating system. Start > Control Panel > Programs > Uninstall a program.
  • Page 96: Managing Files

    3 Operating Your Notebook (Vista) 3.8 Managing Files Updating Antivirus Software Backing Up Files Finding Files Copying a File on the Hard Drive Renaming Files Deleting Files Emptying the Recycle Bin Retrieving Files From the Recycle Bin 3-27...
  • Page 97: Updating Antivirus Software

    Your computer dealer can advise you regarding purchasing antivirus software. Before installing any software from unlicensed sources, scan for viruses. Regularly backup your data to safeguard against loss if your notebook is infected. 3.8.2 Backing Up Files Regularly backing up your files will protect you from losing data from accidental file deletion, viruses or hard drive failure.
  • Page 98: Renaming Files

    The Recycle Bin window appears and lists all deleted files, their previous locations, and the dates you deleted them. Click the File menu, and click Empty Recycle Bin. When the confirmation dialog box appears, click Yes to delete all file(s). All files disappear from the Recycle Bin and are removed from your notebook. 3-29...
  • Page 99: Retrieving Files From The Recycle Bin

    3 Operating Your Notebook (Vista) 3.8.8 Retrieving Files From the Recycle Bin Deleted files are moved to the Recycle Bin and remain there until you empty the Recycle Bin. If you delete a file in error, you can retrieve it from the Recycle Bin: Double-click the Recycle Bin icon.
  • Page 100: Playing Cds And Movies

    3 Operating Your Notebook (Vista) 3.9 Playing CDs and Movies Inserting Discs Adjusting the Volume Adjusting the Picture 3-31...
  • Page 101: Inserting Discs

    4. Snap the disc onto the spindle. 5. Gently push the tray back into the drive. If your notebook has a CD-RW/DVD or DVD, you can watch movies. For more information on playing CDs or watching movies, click Help on the CD player software or DVD player software.
  • Page 103: Caring For Your Notebook

    Chapter 4 Caring for Your Notebook...
  • Page 104 4.1 Caring for Your Notebook Cleaning Your Notebook and Keyboard Cleaning the Display Cleaning the Touch Pad Cleaning the CD/DVD Drive Precautions Never spray cleaning products directly onto your notebook's case or display. Only use products designed for cleaning computer displays.
  • Page 105: Cleaning Your Notebook And Keyboard

    4 Caring for Your Notebook 4.1.1 Cleaning Your Notebook and Keyboard 1. Shut your notebook down, turn it off and disconnect it from the electrical outlet and any external devices, such as a printer. 2. Remove the battery pack. 3. Use the brush attachment of your vacuum cleaner to gently remove dust from your notebook's openings and keyboard.
  • Page 106: Precautions

    Leave off overnight to let it completely dry out before using it again. • Do not turn off your notebook if a drive light indicates a drive is active. Turning off your notebook while it is reading from or writing to a disk may damage the disk, the drive, or both.
  • Page 107: Traveling

    4 Caring for Your Notebook 4.2 Traveling Identifying Your Notebook Packing Your Notebook Setting a Password Travel Tips If Your Notebook is Lost or Stolen...
  • Page 108: Identifying Your Notebook

    4 Caring for Your Notebook 4.2.1 Identifying Your Notebook Attach a nametag or business card to your notebook, or use a permanent marker or stencil to write a unique identifying mark (such as your driver's license number) on the case.
  • Page 109: Travel Tips

    4.2.5 If Your Notebook is Lost or Stolen Call a law enforcement agency to report your notebook lost or stolen. Ask that a case number be assigned and write down the number, along with the name, address, and telephone number of the law enforcement agency.
  • Page 111: Chapter 5 Peripherals

    Chapter 5 Peripherals...
  • Page 112: Pci Express Cards

    5 Peripherals 5.1 PCI Express Cards PCI Express Card Types Installing a PCI Express Card Removing a PCI Express Card...
  • Page 113: Pci Express Card Types

    PCI Express Cards, with hot-plug feature, allow you to install and remove cards when your notebook is running. The card will be detected automatically when installed. Usually PCI Express Cards have a mark or symbol to show which end to insert into the slot.
  • Page 114: Removing A Pci Express Card

    5 Peripherals 5.1.3 Removing a PCI Express Card 1. Push the card all the way to in to release it. 2. Pull the card out of the slot.
  • Page 115: Adding And Removing Sd/Mmc/Ms Cards

    5 Peripherals 5.2 Adding and Removing SD/MMC/MS Cards Before removing an SD/MMC/MS card, stop it running from the configuration utility on the taskbar. Failure to do so could result in data loss. Insert the SD/MMC/MS card into the card reader slot. To remove the SD/MMC/MS card, push it in gently, it ejects automatically.
  • Page 116: Memory Modules

    5 Peripherals 5.3 Memory Modules You can add more memory modules to your computer to improve its performance. To install a memory module: 1. Make sure the computer is turned off. 2. Remove the two screws securing the memory module cover. 3.
  • Page 117: Chapter 6 The Power System (Xp)

    Chapter 6 The Power System (XP)
  • Page 118: Power Management

    6 The Power System (XP) 6.1 Power Management Managing Your Notebook’s Power Power Management Modes Power Options Properties SpeedStep...
  • Page 119: Managing Your Notebook's Power

    6.1.2.1 Standby Mode This mode conserves power by switching off the hard drive and display after a preset period of inactivity (a time-out). When standby mode is exited, your notebook will return to the same operating state it was before entering standby.
  • Page 120 6 The Power System (XP) 6.1.2.2 Hibernate Mode In Hibernate mode, system data is copied to the hard drive, and your notebook is completely shut down to save power. When exiting Hibernate mode, your notebook returns to the same operating state it was in before entering Hibernate mode.
  • Page 121: Power Options Properties

    The Low battery alarm and Critical battery alarm settings alert you when the battery charge falls below a certain percentage. When you receive your notebook, the Low battery alarm and Critical battery alarm check boxes are selected. See 6.2 Battery for more information on low-battery warnings.
  • Page 122 6 The Power System (XP) 6.1.3.4 Advanced Tab With the Advanced tab you can: Set power icon and standby mode password options. Depending on your operating system, program the following functions by clicking an option from the corresponding pull-down menu, and then clicking OK. Set the computer to Stand by / Hibernate / Do nothing when you close the laptop lid Set the computer to Ask me what to do / Stand by / Hibernate / Shut down /...
  • Page 123: Speedstep

    6 The Power System (XP) 6.1.4 SpeedStep Your notebook is equipped with SpeedStep technology to better manage power consumption. It changes the processor speed to find the best balance between your computing performance and power consumption needs. Higher speeds enjoy better performance, while slower speeds conserve more power.
  • Page 124: Battery

    6 The Power System (XP) 6.2 Battery Battery Performance Checking the Battery Charge Power Meter Low-Battery Warning Charging the Battery Removing a Battery Installing a Battery Storing a Battery Working With Extra Battery Packs Maximizing Battery Life...
  • Page 125 6.2.3 Power Meter The power meter indicates the remaining battery charge. When your notebook is running on battery power, you can check the remaining battery charge, double click icon on the taskbar. For more details, including how to make the icon appear on the...
  • Page 126: Low-Battery Warning

    If necessary, the battery will be charged whenever your notebook is connected to an electrical outlet. The battery will not be charged if it or your notebook is too hot, either from use or being in a hot environment. If this occurs, the battery indicator will light amber. Disconnect your notebook from any electrical outlet, and allow it and the battery to cool to room temperature.
  • Page 127: Installing A Battery

    3. Slide the battery lock switch back to the locked position. 6.2.8 Storing a Battery If storing your notebook for an extended period of time, remove the battery. Fully charge the battery before using your notebook again. 6.2.9 Working With Extra Battery Packs...
  • Page 129 Chapter 7 The Power System (Vista)
  • Page 130 7 The Power System (Vista) 7.1 Power Management Managing Your Notebook’s Power Power Management Modes Power Options Properties SpeedStep...
  • Page 131 7.1.2.1 Sleep Mode This mode conserves power by switching off the hard drive and display after a preset period of inactivity (a time-out). When sleep mode is exited, your notebook will return to the same operating state it was before entering sleep.
  • Page 132 Hibernate mode. Hibernate mode can be enabled/disabled in the Power Options window. If enabled, your notebook will go into Hibernate mode if the battery charge level becomes critically low.
  • Page 133 7.1.4 SpeedStep Your notebook is equipped with SpeedStep technology to better manage power consumption. It changes the processor speed to find the best balance between your computing performance and power consumption needs. Higher speeds enjoy better performance, while slower speeds conserve more power.
  • Page 134: Chapter 7 The Power System (Vista)

    7 The Power System (Vista) You can also individually alter and save each of these settings and schemes if desired. Choose from the following three power plans that best describes the desired relationship between power and performance. Windows Vista automatically chooses the SpeedStep mode to find the most appropriate speed for your processor according to the type of plan you choose and your current system demands.
  • Page 135: Battery

    7 The Power System (Vista) 7.2 Battery Battery Performance Checking the Battery Charge Power Meter Low-Battery Warning Charging the Battery Removing a Battery Installing a Battery Storing a Battery Working With Extra Battery Packs Maximizing Battery Life...
  • Page 136 Amber > approximately 3 minutes left; system beeps 7.2.3 Power Meter The power meter indicates the remaining battery charge. When your notebook is running on battery power, you can check the remaining battery charge, double click the icon on the taskbar. For more details, including how to make the icon appear on the taskbar if it is...
  • Page 137: Low-Battery Warning

    If necessary, the battery will be charged whenever your notebook is connected to an electrical outlet. The battery will not be charged if it or your notebook is too hot, either from use or being in a hot environment. If this occurs, the battery indicator will light amber. Disconnect your notebook from any electrical outlet, and allow it and the battery to cool to room temperature.
  • Page 138: Installing A Battery

    3. Slide the battery lock switch back to the locked position. 7.2.8 Storing a Battery If storing your notebook for an extended period of time, remove the battery. Fully charge the battery before using your notebook again. 7.2.9 Working With Extra Battery Packs...
  • Page 139: Chapter 8 The Bios Setup Program

    Chapter 8 The BIOS Setup Program...
  • Page 140: Introduction

    Password protection from unauthorized use Boot devices The settings made in the Setup program intimately affect how the notebook performs. It is important, therefore, to first understand all the available options, and second, to make settings appropriate for the way you use the notebook. This chapter guides you through the Setup program by providing clear explanations for all Setup options.
  • Page 141: Navigating Through The Bios Setup Program

    BIOS hot keys to return to the previous value. The hot keys are discussed in more detail later in this chapter. When turning on the notebook for the first time you may be prompted to run the BIOS Setup program. A warning message may appear on the screen if the hardware configuration is changed or the POST fails.
  • Page 142 TPM State Allows the user to configure TPM settings. Boot Allows the user to specify the order in which the notebook is to check for a device to boot the system. Exit Allows the user to save CMOS setting and exit the Setup program.
  • Page 143 8 The BIOS Setup Program To move between menu bar items, use the [◄] and [►] arrow keys until the desired item is highlighted. For example, if you want to move from the Main menu to the Advanced menu, press the right arrow key [►] once. Item Specific Help To the right of the Setup screen, you will notice an item specific help bar.
  • Page 144: The Main Menu

    8 The BIOS Setup Program 8.3 The Main Menu When the Setup program is accessed, the Information screen appears. It displays the following pieces of information regarding your current system: Phoenix TrustedCore(tm) Setup Utility Main Advanced Security TPM State(*) Boot Exit Item Specific Help System Time:...
  • Page 145 8 The BIOS Setup Program Extended Memory This field reports the memory size of the extended memory with an integer in the system, but 32Bit SMI will occupy 1 MB and UMA frame buffer (Integrated VGA uses only). Extended Memory size = Total memory size – 1 MB – 1 MB – UMA frame buffer BIOS Version This field displays current version of the BIOS.
  • Page 146: The Advanced Menu

    8 The BIOS Setup Program 8.4 The Advanced Menu Selecting Advanced on the menu bar displays the Advanced Menu. Each field on this menu is covered below. Phoenix TrustedCore(tm) Setup Utility Main Advanced Security TPM State(*) Boot Exit Item Specific Help AHCI Configuration: [Enabled] Enhanced AHCI:...
  • Page 147: The Security Menu

    8 The BIOS Setup Program 8.5 The Security Menu The notebook's advanced security system allows you to set a password to prevent unauthorized access to system resources, data, and the BIOS Setup program. This section covers each Security parameter. Selecting Security from the menu bar displays the Security menu.
  • Page 148 8 The BIOS Setup Program Type the password and press the [Enter] key. You can type up to eight alphanumeric characters. Symbols are ignored. To confirm the password, type the password again and press the [Enter] key. Supervisor Password Is / User Password Is This field displays if the Supervisor/User Passwords is set.
  • Page 149 8 The BIOS Setup Program Password on boot If password on boot is required, the password must be set otherwise it cannot be enabled. Enable this field to have setup prompt for the password when the computer boots. Built-in HDD1 Status HDD Password is set.
  • Page 150 8 The BIOS Setup Program If password on boot is required, the password must be set otherwise it cannot be enabled. The formats of the password are as follows: Length: No more than 8 characters. Characters: Alphanumeric keys only. The shift status, Ctrl, Shift, Alt, and Capital, are ignored.
  • Page 151: The Tpm State Menu

    8 The BIOS Setup Program 8.6 The TPM State Menu This menu allows the user to understand current TPM state and change the TPM state. The TPM state menu will show up if TPM exists within the system and Trusted Platform Support item is enabled in “Security Menu”.
  • Page 152: The Boot Menu

    8 The BIOS Setup Program 8.7 The Boot Menu This menu allows the user to decide the order of boot devices to load the operating system. Bootable devices include the diskette drive in module bay, the onboard hard disk drive and the CD-ROM in module bay.
  • Page 153: The Exit Menu

    8 The BIOS Setup Program 8.8 The Exit Menu Phoenix TrustedCore(tm) Setup Utility Main Advanced Security TPM State(*) Boot Exit Item Specific Help Exit Saving Changes Exit Discarding Changes Load Setup Defaults ↑↓ Select Item Help F5/F6 Change Values Setup Defaults ←→...
  • Page 154 8 The BIOS Setup Program Load Setup Defaults Allows the user loads default values in CMOS Setup. The following message prompts the user to confirm after pressing [Enter] on this item. Setup Confirmation Load default configuration now? [Yes] [No] Select Yes to confirm or No to abort. You will then return to the setup screen. 8-15...
  • Page 155 8 The BIOS Setup Program 8-16...

This manual is also suitable for:

Fl90

Table of Contents