Procedure 1 Express Card Test; Procedure 2 Express Card Socket Replacement Check - Compal JHT01 Service Manual

This section describes how to determine if the express card player is functioning
properly. The process is summarized in Figure 6-12. Perform the steps below
starting with Procedure 1 and continuing with the other procedures as required.
• Procedure 1:
• Procedure 2:
13.1 Procedure 1
The Express test card contains a express test program. Ensure the card in fully
inserted into the socket before running the program.
If an error occurs during the express test, perform Procedure 2. If no error occurs,
it is likely the that original PC card was faulty.
13.2 Procedure 2
The express card socket may be damaged or defective, for instance the socket
pins can be bent. Disassemble the computer following the steps described in
Chapter 4, Replacement Procedures and replace the socket. If the problem persists,
the system board may be defective or damaged.
express card test
express socket replacement check
Express card test
Express card socket replacement check
JHT01 Service Manual
6-31