Oki Data CONFIDENTIAL
3.2.22 DC motor (fuser)
(1) Remove the Cover-Rear-Blind. (Refer to 3.2.3)
(2) Remove the Cover–Side-R. (Refer to 3.2.5)
(3) Remove the power supply unit. (Refer to 3.2.7)
(4) Remove the Cover-Assy-Stacker. (Refer to 3.2.20)
(5) Remove the Eject-Assy. (Refer to 3.2.21)
(6) Disconnect the cable from the DC motor (fuser) ① .
(7) Remove the three screws (silver) ② , and remove the DC motor (fuser) ① .
①
(8) Separate the DC motor (fuser) ① and the Plate-Motor-FU ③ .
①
45487001TH Rev.1
②
③
3. Component replacement
3-20 /