Fan(Fuser) / Belt Motor/ High-Voltage Board/Cover Open Switch; Mpt Assy - Oki C711 Maintenance Manual

Oki Data CONFIDENTIAL
4.2.16 FAN(Fuser) / Belt motor/ High-voltage board/
Cover open switch
(1) Remove the left side cover. (See section 4.2.3)
(2) Remove the screw (silver, No:42920406) and connector, and remove the belt
motor .
(3) Remove the connector, and rotate the FAN (Fuser)
(4) Remove the connector and disengage the claw A (2 places), and remove the
cover open switch .
(5) Remove the 2 screws
connectors (2 places), and disengage the claw B (7 places). Remove the high-
voltage power supply .
Air
Claw B
Claw B
(Black)
(Silver)
FAN(Fuser)
TR-C
Belt thermistor
44205401TH Rev.1
clockwisely to remove.
(silver, No:42920406 and black, No:42932708) and
Claw A
High-voltage power supply
TR-M TR-Y TR-K
CN1

4.2.17 MPT Assy

(1) Open the MPT Assy
(2) Remove the stoppers (2 places) while pushing the arms (2 places) on MPT
Assy outside, pull the supporters (2 places) in the direction of the arrow and
remove them, and remove the MPT Assy
Stopper (2 places)
Cover open switch
.
.
Arm
Supporter (2 places)
4. Component replacement
75 /