Oki Data CONFIDENTIAL
3.2.17 Feeder-Assy-Regist / Clutch
(1) Remove the Cover-Rear-Blind. (Refer to 3.2.3)
(2) Remove the Cover-Side-L and the Cover–Side-R. (Refer to 3.2.4 / 3.2.5)
(3) Remove the USB connector. (Refer to 3.2.9)
(4) Remove the power supply unit. (Refer to 3.2.7)
(5) Remove the DC motor (hop). (Refer to 3.2.8)
(6) Disconnect all cables of the Feeder-Assy-Regist ① from the PU/CU-Board.
(7) Remove the screw (black) ② , and disengage the Stay-Arm-Front from the
Plate-Assy-Side(L).
(8) Remove the two screws (silver) ③ , and remove the Cover-Front-Side-R ④ .
(9) Remove the two screws (silver) ⑤ , and remove the Cover-Front-Side-L ⑥ .
②
Stay-Arm-Front
⑥
⑤
③
45487001TH Rev.1
④
(10) Remove the two screws (silver/8mm) ⑦ , and remove the Plate-Front ⑧ .
(11) Remove the five screws (silver) ⑨ and the two screws (silver) ⑩ , and remove
the Feeder-Assy-Regist ① .
⑦
⑨
⑩
①
⑦
⑨
⑩
3. Component replacement
⑧
⑦
⑨
⑩
⑨
3-15 /