Assembly Procedure; Assembly Of The Printer Main Unit - Oki B721 Maintenance Manual

Oki Data CONFIDENTIAL

2.5 Assembly procedure

2.5.1 Assembly of the printer main unit

Unpacking
Since the printer weights approximately 27 kg, it should be lifted by two or more people.
Note! • Be sure to use the consumables or maintenance units provided with this
printer at first. Otherwise, the life of the consumables or maintenance units
may not be displayed correctly, or you may not be able to use them later.
• The print cartridge (the green tube) is very delicate. Handle it carefully.
• Do not expose the print cartridge to direct sunlight or very bright interior
light (approximately more than 1500 lux). Even under the normal interior
light, do not leave it for more than 5 minutes.
• Packaging and cushioning material are needed if transporting the printer.
Do not throw them away.
(1) Remove your printer from the box and remove all cushioning materials and the
plastic bag from your printer.
(2) Remove the two strips of protective tape on the right side and at the back of your
printer.
45487001TH Rev.1
Personal injury may occur.
Protective tape
(3) Insert your finger into the recess on the right side of the printer and pull the
front cover open lever to open the front cover forward.
Note! Open the front cover gently. If you open it rapidly, the MP Tray may open.
Front cover
(4) For the ES7131/MPS5501b, remove the protective tape and orange stopper.
Protection tape
Stopper
(5) Turn the blue lever of the print cartridge fully in the direction of the arrow.
2. Installation
Front cover open lever
Stopper
Lever(blue)
2-6 /