Oki B721 Maintenance Manual page 51

Oki Data CONFIDENTIAL
(5) Press the scroll button to select [WPS-PIN] and then press the <ENTER> button.
(6) Set the 8-character PIN code displayed on the display screen on the access point
and start WPS-PIN.
Note! • After pressing the button, immediately perform step 7.
• The PIN code input method and WPS-PIN starting method differ depending
on the access point. For details, refer to the instruction manual for the
access point.
(7) Select [Yes] and then press the <ENTER> button.
Memo If [No] is selected, the screen returns to that from step 5. Each time the
confirmation screen is displayed, the PIN code is automatically generated and
changed.
45487001TH Rev.1
(8) [Implementing PIN method...] is displayed on the screen.
Note! • Panel operations cannot be performed during WPS execution.
• When [Connection successful] is displayed, this equipment is connected to
the wireless LAN.
Memo If [Timeout] is displayed, it is possible that the access point of the connection
destination could not be found within the time limit. After entering the PIN code
from this equipment into the access point and starting WPS-PIN, select [Yes]
in step 7 again within 2 minutes.
2. Installation
2-34 /