Oki B721 Maintenance Manual page 96

Oki Data CONFIDENTIAL
Item
Admin Setup PS USB
Setup Protocol
PDF Paper
Size
PDF
Scaling
Size
PCL Font
Setup Source
Font
Number
Font Pitch
45487001TH Rev.1
Settings Functions
ASCII Specifies PS communication protocol
RAW mode of data from USB.
(In RAW mode, Ctrl-T is invalid.)
Current Tray Size Paper size Select of PDF Direct Print
Size in PDF file Current Tray Size : It selects the current
Scaling Size tray, and it lets fit paper size of the tray.
Size in PDF file : It refers to the paper size
in a PDF file and does an automatic tray
selection.
Scaling Size : It refers to the paper size
in a PDF file and does an automatic tray
selection. If the paper with the same size
with PDF file, print on it. If ther is not,
request paper on current tray, and scaling
print.
1% Specifies scaling size by percent when
~ PDF Paper Size is set to Scaling Size.
99% [Conditions for display]
This menu only is displayed when PDF
Paper Size is set to Scaling Size.
Resident Specifies the location of PCL default font.
Downloaded Downloaded: Displayed when soft font
is downloaded to RAM as permanent
designation.
0 Sets the PCL font number.
S1 The valid range of this variable changes
depending on the FONT SOURCE setting
at the time. If the default font is set for
FONT SOURCE, the number starts at
0. If it is not, the number starts at 1. The
maximum value is equal to the number of
fonts installed in FONT SOURCE.
S1 is displayed only when soft font is
downloaded with permanent designation.
0.44CPI Width of the PCL default font. The unit
~ is character/inch (Default font is fixed-
10.00CPI pitch, scalable font.) The value of pitch
~ is displayed down to the second decimal
99.99CPI place (in the unit of 0.01 CPI).
Displayed only when the font selected in
Font No. is fixed-spacing, scalable font.
Item
Admin Setup PCL Font
Setup Height
Symbol
Set
4. Maintenance menus
Settings Functions
4.00 point Height of the PCL default font. The value
~ is displayed down to the second decimal
12.00 point place (in the unit of 0.25 POINT.)
~ Displayed only when the font selected in
999.75 point Font No. is proportional-spacing, scalable
font.
PC-8 Sets a symbol set of PCL.
PC-8 Dan/Nor Modifies a symbol set to the default
PC-8 Grk symbol set of the font when the selected
PC-8 TK font of FONT No. can not use the selected
PC-775 symbol set.
PC-850
PC-851 Grk
PC-852
PC-855
PC-857 TK
PC-858
PC-862 Heb
PC-864 L/A
PC-866
PC-866 Ukr
PC-869
PC-1004
Pi Font
Plska Mazvia
PS Math
PS Text
Roman-8
Roman-9
Roman Ext
Serbo Croat1
Serbo Croat2
Spanish
Ukrainian
VN Int'l
VN Math
VN US
Win 3.0
Win 3.1 Arb
Win 3.1 L/G
Win 3.1 Blt
Win 3.1 Cyr
Win 3.1 Grk
4-11 /