Oki B721 Maintenance Manual page 50

Oki Data CONFIDENTIAL
Memo • If [Timeout] is displayed, it is possible that the access point of the
connection destination could not be found within the time limit. Redo from
step 6.
• If [Overlap] is displayed, WPS-push button is being executed on 2 or more
access points. Please wait for a short time and then retry.
45487001TH Rev.1
WPS-PIN
(1) Press the scroll button to select [Wireless Setting] and then press the <ENTER>
button.
(2) Enter the administrator password using the ten-key pad, then press the <ENTER>
button.
The factory default password is "aaaaaa". Press the <ENTER> button whenever
inputting one character.
(3) When the display shown below appears, read it carefully. Press the <ENTER>
button or wait until the display changes.
(4) Check that [Automatic Setup (WPS)] is selected and then press the <ENTER>
button.
2. Installation
2-33 /