Oki B721 Maintenance Manual page 209

Oki Data CONFIDENTIAL
6.5.5.1.4 Confirm encryption strength of a printer
Version display of the browser that is confirmed by section "6.5.5.1.3 Check version
number of the Web browser" has description on encryption strength of the browser. The
browser in which the encryption strength is not set to 128 bits, the browser cannot establish
communication with the printer in which the encryption strength is not set to "Standard".
Either, upgrade the browser until it supports 128 bits (high encryption) or set the printer
encryption strength to "Weak".
45487001TH Rev.1
Solution: Set the encryption strength to "Weak".
How to change encryption strength with Telnet
Note! Telnet cannot be used if it remains in the default setting. To change the
encryption strength, Telnet must be set to Enable.
Select the command prompt (DOS prompt) and enter "Telnet <printer IP address>", and
press Return.
Establish connected using administrator user name and password
Select the menus in this order: [4: Security Config]
Cipher Strength]. Then, change the cipher strength as desired (1: Strong, 2: Standard, 3:
Weak).
6. Troubleshooting procedure
[5: Cipher (SSL/TLS)] [2:
6-76 /