System Maintenance Menu (For Maintenance Personnel) - Oki B721 Maintenance Manual

Oki Data CONFIDENTIAL

4.1 System maintenance menu (For maintenance personnel)

This menu is activated when the back
down for 5 seconds while the printer is ready to print.
The menu is displayed in English irrespective of the destination of the product.
Note! Since this menu is changed depending on the destination or for other reason,
it is not disclosed to the end users.
Table 4-1 Maintenance menu display table
Category Item (1st Line)
(2nd Line)
System Enter Password ******
Mainte- ******
nance
Save Syslog Execute
Print Syslog Execute
Engine Diag Mode Execute
45487001TH Rev.1
and <ENTER> and <ON LINE> buttons are held
Value
DF Functions
000 Enters a password to enter the system
000 maintenance menu. The default is "000000".
From 6 to 12 digits of number or Roman
character can be enter
- Save network communication log(syslog)
to flash rom.
- Print the saved network communication
log(syslog).
- It will be ONLINE by pressing ENTER key
which issues the command from CU to PU.
Check for the operation while changing the
factories supplies during keeping the power
ON. A new fuse will not cut and the count-
operation will not be included in the old
value).
The check mode will finish and invalid if
turing the power ON.
Value
Category Item (1st Line)
(2nd Line)
Engine Diag Mode
Change
Password
New ******
Password ******
Verify ******
Password ******
4. Maintenance menus
DF Functions
- Enters self-diagnosis mode of the engine.
- Displays menus to change a password.
- Sets a new password to enter "System
Maintenance" menu
From 6 to 12 digits of number or Roman
character can be enter.
- Makes User input the new password to enter
"System Maintenance" menu which is set by
"New Password" for confirmation.
From 6 to 12 digits of number or Roman
character can be enter.
4-2 /