Installation Procedure Overview; Procedure And Required Personnel - Oki LP-1040 Installation Manual

Chapter 1
1.1

Procedure and required personnel

Table 1-1 shows the procedures and number of persons/people/workers required to install the
Printer.
No.
1 Transfer to the unpacking
location
2 Unpack
3
Move to the installation
location
4 Install
5 Set parameters
6 Confirm the Printer
operation without connecting
to a computer
7 Connect the interface cable
8 Confirm the operation of the
whole system
9 Hand over
Note:
Generally transfer or relocate the Printer with a forklift or dolly. So check the transfer route for the forklift or dolly
in advance.
If you need to carry the Printer without a forklift or dolly, ensure that the required four to six
people/workers/persons are available, as the Basic Printer Model weighs approximately 185kg (6525.69oz),
and the Multifunction Model Printer approximately 205 kg (7231.17oz).

Installation procedure overview

Table 1-1 Installation procedure overview
Procedure
Transfer the packed box to the
unpacking location.
Remove the printer and the accessories
from the box. Check the contents
referring to the packing list.
After removing the Printer from the box,
move it to the installation location.
Install the Printer, set the parts and
accessories, and then connect the
power cable.
Set the parameters for printing and
communication.
Check the print quality in the
maintenance mode.
Connect the interface cable.
Connect to the host computer, and then
check the overall operation of the entire
system. If operation is normal, the
hardware installation procedure is
complete.
Explain the basic operation procedures
of the Printer to the user.
OKI Data Infotech Corporation CONFIDENTIAL
Description
1-1
Personnel Reference
2* Section 3.1
2 Section 3.2
2* Section 3.3
1 Section 3.4
1 Chapter 4
1 Chapter 5
1 Chapter 6
1 Chapter 7
1 Chapter 8