Table of Contents
Advertisement
Installing the Device
Installation Procedure
Work according to the relevant procedures and the customer installation conditions. If not mounting
1
any options, skip the reading of the procedures described as "Optional".
1
Opening the Package and Installation
2
Mounting Consumables (P.39)
3
Mounting the Expansion Tray Unit (Optional) (P.44)
4
Mounting the Built-in HDD (Optional) (P.48)
2
5
Connecting Using LAN Cable (P.57)
6
Connecting Using USB Cable (P.58)
Installing and Connecting the Color Management Server
7
("Server Installation Guide")
8
Connecting Power Cables (P.51)
9
Connecting to PC (P.55)
3
10
Adding Options (P.72)
Printing from Trays (P.81)
11
Printing from the Multi-Purpose Tray (P.87)
Opening the Package and
Installation
4
This section explains the procedure from opening
the package to removing and installing the
product.
Opening the Package and Moving
the Device
Make sure to install in a sufficiently robust
location that can support the weight of the
device and its options. Do not install in unstable
locations such as on unsteady tables or slanted
locations, or in locations with strong vibrations.
Doing so risks causing injury due to the device
falling or toppling.
Memo
z For device installation locations, see
Conditions"
(P.33).
CAUTION
z The weight of the device is approx. 111kg*, so
make sure to use at least 4 people to lift.
*: Includes consumables such as image drums and toner
cartridges, etc.
"Installation
There is a risk of injury.
(Optional)
(Optional)
(Sold
separately)
(Optional)
The main unit weights are as described below.
With the toner
cartridge and image
drum mounted
Approx. 111kg
- 36 -
With the toner
cartridge and image
drum removed
Approx. 91kg
Advertisement
Table of Contents
