Basic Parameters - Linkcom Link Ana iDP Manual

The following codes may be the same or different for the resolution switching on multiple parallel
connected relay code.
Parameter Value
3#1
abcd – Link Ana iDP sends a serial code for the code relay (COSW) after evaluation code from keys
(keyboard) namely for 1 pulse
Parameter Value
3#2
abcd – Link Ana iDP sends a serial code for the code relay (COSW) after evaluation code from
telephone (DTMF) namely for 1 pulse
Parameter Value
3#3
abcd – Link Ana iDP sends a serial code for the code relay (COSW) after evaluation code from keys
(keyboard) namely for 2 pulses
Parameter Value
3#4
abcd – Link Ana iDP sends a serial code for the code relay (COSW) after evaluation code from
telephone (DTMF) namely for 2 pulses
Parameter Value
3#5
abcd – Link Ana iDP sends a serial code for the code relay (COSW) after evaluation code from other
modes m relay 1

6.3. Basic parameters

Parameter Value
41
v – dial type
v=0 is DTMF tone dial, v=1 pulse dial
Parameter Value
42
z – button for call prolongation ∗ or # (10 sec before Maximum Call Duration the unit will emit a tone.
Pressing this button will prolong the call).
p.15 | 23
Description
Activation code 1 pulse from buttons
abcd
(0000-1111)
Description
Activation code 1 pulse from phone
abcd
(0000-1111)
Description
Activation code 2 pulses from buttons
abcd
(0000-1111)
Description
Activation code 2 pulses from phone
abcd
(0000-1111)
Description
Activation code from other modes of
switch
abcd
(0000-1111)
Description
v Dial type
Description
z Character to prolong the call (* / #)
Default
0000
Default
0000
Default
0000
Default
0000
Default
0000
Default
0
Default
*