Basic Parameters - Linkcom link smile User Manual

r – relay number [1-2]. Always 1 for Smile DoorPhone
aa – command from phone to relay closing [2 digits]
Parameter Value
37 r ss
r – relay number
ss – duration of relay closing [2 digits 01-99]. (time 00 means 0,5sec)

5.3. Basic parameters

Parameter Value
41 v
v – dial type
v=0 is DTMF tone dial, v=1 pulse dial
Parameter Value
42 z
z – button for call prolongation ∗ or # (10 sec before Maximum Call Duration the unit will emit a tone.
Pressing this button will prolong the call).
Parameter Value
43 g bb
g – command order [1-2] (they are two to be possibility hang up the doorphone when each relay is
used)
bb – command to and call by phone [2 digits]
It is profitable setup the same command to hang up the doorphone as same as activate relay
35)
Note:
The command has always 2 digits but if you want use 1 digit then you have possibility insert "*a" where
a is just one number.
Parameter Value
44 xxxx
xxxx – service password for entry to programming by phone (DTMF)
Parameter Value
Linkcom France
11 rue du Soleil Levant 92140 CLAMART
Description
Relay closing time (01-99)
Description
Dial type
Description
Character to prolong the call (* / #)
Description
End call (00-99,*0-*9)
Description
Service password (0000-9999)
Description
Default
105
Default
0
Default
*
Default
155
Default
0000
Default
Copyright © 2011 – Linkcom – All rights reserved
(Parameter
11