I-Sgpio 1/2 & S-Sgpio Headers; Sata_Dom Power Connectors - Supermicro X10DAL-i User Manual

I-SGPIO 1/2 & S-SGPIO Headers
Three SGPIO (Serial-Link General
Purpose Input/Output) headers are
located on the motherboard. These
headers support Serial_Link interface
for onboard SATA/SAS connections
when available. See the tables on the
right for SGPIO support and for pin
definitions.

SATA_DOM Power Connectors

Two 3-pin power connectors (JSD1/
JSD2) are used to provide power to
onboard SATA DOM (Disk_On_Mod-
ule) devices. Connect appropriate
cables here to provide power for your
SATA DOM devices. See the layout
below for the locations of the power
connectors.
JHD_AC1
BIOS
Battery
BT1
S-SATA3
S-SATA2
S-SATA1
PCH
S-SATA0
D
E
JSD2
I-SATA3
I-SATA2
I-SATA1
I-SATA0 B A
C
JL1
JSTBY1
JF1
LEDPWR
FAN6
JPL2
HD AUDIO
FAN5
CPU1
I-SGPIO 1/2 & S-SGPIO
Pin Definitions
Pin # Definition
1 NC
3 Ground
5 Load
7 Clock
Note: NC= No Connection
I-SGPIO 1/2 & S-SGPIO
I-SGPIO 1 I-SATA 0-3 supported
I-SGPIO 2 I-SATA 4/5 supported
S-SGPIO S-SATA 0-3 supported
SATA DOM/Connectors
Pin Definitions
Pin # Definition
1 +5V
2 Ground
3 Ground
USB5/6 (3.0) USB3/4
(3.0)
J21
JPI2C1
LAN2 LAN1
X10DAL-i
Rev. 1.02
CPU2
JPWR2
JPWR1
2-29
Chapter 2: Installation
Pin Definition
2 NC
4 Data
6 Ground
8 NC
Support
A. I-SGPIO1
B. I-SGPIO2
C. S-SGPIO
D. JSD1
E. JSD2