Usb 0/1 Wake-Up Enable - Supermicro X10DAL-i User Manual

X10DAL-i Motherboard User's Manual

USB 0/1 Wake-up Enable

Jumper JPUSB1 is used for USB 0/1
wake-up support, which will allow the
system to "wake-up" when a signal sent
by a device installed in the backpanel
USB port 0 or port 1 is received by the
system. The default setting is on pins
1-2 to enable USB 0/1 wake-up support.
See the table on the right for jumper
settings.
JHD_AC1
BIOS
Battery
BT1
S-SATA3
S-SATA2
S-SATA1
PCH
S-SATA0
JSD2
I-SATA3
I-SATA2
I-SATA1
I-SATA0
JL1
JSTBY1
JF1
LEDPWR
FAN6
JPL2
HD AUDIO
FAN5
CPU1
2-36
USB 0/1 Wake-up Enable
Jumper Settings
Jumper Setting
Pins 1-2
Pins 2-3
A
USB5/6 (3.0)
USB3/4 (3.0)
J21
JPI2C1
LAN2 LAN1
X10DAL-i
Rev. 1.02
CPU2
JPWR2
JPWR1
Definition
Enabled (Default)
Disabled
A. Backpanel USB Enable