Overheat (Oh)/Fan Fail Led; Power Fail Led - Supermicro X10DAL-i User Manual

Overheat (OH)/Fan Fail LED

Connect an LED cable to pins 7 and 8
of JF1 to provide advanced warnings
of chassis overheating and fan failure.
Refer to the table on the right for pin
definitions.

Power Fail LED

The Power Fail LED connection is
located on pins 5 and 6 of JF1. Re-
fer to the table on the right for pin
definitions.
JPL2
JHD_AC1
BIOS
Battery
S-SATA3 BT1
S-SATA2
S-SATA1
PCH
S-SATA0
JSD2
I-SATA3
I-SATA2
I-SATA1
I-SATA0
JL1
JSTBY1
JF1 LEDPWR
USB5/6 (3.0)
USB3/4 (3.0)
FAN6
J21
JPI2C1
HD AUDIO
LAN2 LAN1
X10DAL-i
FAN5
Rev. 1.02
CPU2
CPU1
2-23
OH/Fan Fail/PWR Fail LED
Pin Definitions (JF1)
Pin # Definition
7 Vcc
8 OH/Fan Fail LED)
OH/Fan Fail Indicator
Status
State Definition
Off Normal
On Overheat
Flash- Fan Fail
ing
PWR Fail LED
Pin Definitions (JF1)
Pin # Definition
5 3.3V
6 PWR Supply Fail
A. OH/Fail Fail LED
B. PWR Supply Fail
Ground
X
Power LED
HDD LED
NIC1 LED
NIC2 LED
A
OH/Fan Fail LED
B
PWR Fail LED
JPWR2
Ground
JPWR1
Ground
Chapter 2: Installation
20 19
NMI
X
Vcc
Vcc
Vcc
Vcc
Vcc
Vcc
Reset
Reset Button
Power Button
PWR
2 1