Internal Speaker; Power Led/Speaker - Supermicro X10DAL-i User Manual

Internal Speaker

The Internal Speaker, located at SP1,
can be used to provide audible indica-
tions for various beep codes. See the
table on the right for pin definitions.
Refer to the layout below for the loca-
tion of the Internal Buzzer (SP1).

Power LED/Speaker

On the JD1 header, pins 1-3 are used
for power LED indication, and pins
4-7 are for the speaker. Please note
that the speaker connector pins (4-7)
are used with an external speaker. If
you wish to use the onboard (internal)
buzzer, please close pins 6-7 with a
jumper. See the tables on the right for
pin definitions.
JPL2
JHD_AC1
BIOS
Battery
BT1
S-SATA3
S-SATA2
S-SATA1
PCH
S-SATA0
JSD2
I-SATA3
I-SATA2
I-SATA1
B
I-SATA0
JL1
JSTBY1
JF1
LEDPWR
FAN6
HD AUDIO
FAN5
A
CPU1
Internal Buzzer (SP1)
Pin Definition
Pin #
1 Pos. (+)
2 Neg. (-)
PWR LED
Pin Definitions
Pin # Definition
1 Anode (+)
2 Cathode (-)
3 NA
USB5/6 (3.0)
USB3/4 (3.0)
J21
JPI2C1
LAN2 LAN1
X10DAL-i
Rev. 1.02
CPU2
JPWR2
JPWR1
2-27
Chapter 2: Installation
Definitions
VCC
Beep In
Speaker Connector
Pin Settings
Pin # Definition
4-7 External Speaker
6-7 Internal Speaker
A. Internal Speaker
(Buzzer)
B. PWR LED/Speaker