Supermicro X10DAL-i User Manual page 18

System-
Health
Monitoring
System
Management
Dimensions
Note: Both CPUs need to be installed for full access to the PCI-E slots,
DIMM slots, and onboard controllers. Refer to the block diagram on page
1-10 to determine which slots or devices may be affected.
CPU Monitoring
•
Onboard voltage monitors for 1.05V, 1.25V, 1.5V,
+3.3V, 3.3VSB, +5V, +5V Standby, +12V, chipset,
memory, CPU1/2 vcores, and battery voltages.
•
CPU/System overheat LED and control
•
CPU Thermal Trip support
•
Thermal Monitor 2 (TM2) support
Fan Control
•
Low noise fan speed control
LED Indicators
•
System/CPU Overheat LED
•
Suspend-state LED
System Management
•
PECI (Platform Environment Configuration Interface)
2.0 support
•
System resource alert via SuperDoctor® 5
•
Thermal Monitor 2 (TM2) support
•
Chassis Intrusion Header and Detection
•
SuperDoctor® 5, Watch Dog, NMI
•
12.00" (L) x 10.00" (W) (304.80 mm x 254.00 mm)
1-9
Chapter 1: Overview