Operating Information - HAKO Hakomatic B45 Instruction Manual

Hide thumbs Also See for Hakomatic B45:
Table of Contents

Advertisement

Safety information
1.3

Operating information

• Before starting the machine up for
the first time, the battery to be used
must be fully charged, properly, by
implementing the initial battery char-
ge routine. Please pay attention to
the operating manual provided with
the charging unit as well as the ma-
nual from the battery manufacturer.
Hako assumes no liability for dama-
ge to the battery caused by a fault
when the battery is charged for the
first time.
• Check the operational safety of the
machine each time before starting it
up! Clear any faults immediately!
• Before starting work, the operator
must be fully familiar with all adjust-
ment, operating and control ele-
ments as well as their respective
function! It is too late to do this when
the machine is actually in operation!
• Always wear heavy duty, non-slip
footwear when working with the ma-
chine.
• The machine may only be driven on
and the equipment used on those
surfaces which have been approved
by the contractor or person appoin-
ted by him.
8
• When using the machine, it is essen-
tial to pay attention to third parties,
especially children.
• Start driving immediately after swit-
ching on the brush head drive other-
wise imprints of the brush could be
produced on the floor.
• Only use cleaning agents suitable for
the vendor (non-foaming) and obser-
ve all the use, disposal and warning
information provided by the cleaning
agent manufacturer.
• Only open empty recovery tanks.
• The machine is not suitable for clea-
ring up hazardous, inflammable or
explosive fluids, dust or substances.
• It is forbidden to use the machine in
potentially explosive atmospheres.
• To prevent unauthorized use of the
machine, remove the key from the
main switch (Hakomatic B45 CL) on-
ly).
• When transporting the machine, the
squeegee and brush head must be
raised. The way of driving must be
adapted to the local conditions.
• The machine has been conceived for
use on level surfaces with a maxi-
mum gradient of 2%.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

7700

Table of Contents