HAKO Hakomatic B45 Instruction Manual page 40

Maintenance and Service
Hako-System Maintenance II
The following maintenance woks are to
be performed by an authorised Hako
Service workshop.
To be performed
Perform maintenance works according to Hako-System Maintenance I
Inspect steering rollers for tread damages and bearing slackness and replace if
required
Check function of water pump and replace if required
Check drain hose of the soiled water tank and replace if required
Check deflector roller of the brush head and replace if required
Check suction hose for tight fitting and damages and replace if required
Check supporting wheel of the squeegee and replace if required
Test drive and function test
40
Interval
every 250 hours of operation
o
o
o
o
o
o
o
o