Total Discharge Signal Transdu; Cer (Tsg); Servicing The Driving Batteries; Replacing The Batteries - HAKO Hakomatic B45 Instruction Manual

Maintenance and Service
5.4.3 Total discharge signal trans-
ducer (TSG)
The machine features a total discharge
signal transducer to prevent total batte-
ry discharge.
The TSG is set to the built-in batteries at
the factory. The TSG needs to be adap-
ted to other batteries approved by Ha-
ko.
The total discharge signal
transducer may only be adju-
sted by a licensed Hako work-
shop!

5.4.4 Servicing the driving batteries

Never keep discharged batteries but re-
charge them immediately!
For information on servicing driving bat-
teries, refer to operating manual 88-60-
2556.
44

5.4.5 Replacing the batteries

Use batteries approved by
Hako only!
Use maintenance-free and
sealed batteries only!
Batteries to be replaced by
qualified service technicians
only!
We recommend our licensed
Hako Customer Service.

5.4.6 Disposing of batteries

Used batteries with the recycling sym-
bol contain reusable commodities. Do
not throw into the household waste.
See section 1.6 Ecological Information.